SkooterG

I've just had a Wilbers Nivomat installed. The shock aims to auto-nivellate, meaning to always default to the same height, no matter the...

Simple swap with shock in place. Completely back off preload and remove lower mount bolt and clevis so lower spring perch can be raised...

Amen on that Brother Dan. Lots of cusswords involved.

The actual o-ring is a 2-116 N70 buna o-ring. I work for a hydraulics shop and had our parts manager help me out.

An interesting on the Gen III TPS... https://www.fjrforum.com/threads/anatomy-of-gen-iii-fly-by-wire-tps.169700/

I always have used Yamaha OEM O-rings. Why go through the hassle you are now with cheap parts that *might* work. I use steel wool on...

A Priest, Minister and Rabbit walk into a Blood Donation Center. The Rabbit says, "I think I'm a Type-O."

Day late and a dollar short! 😄

If the shock is properly sprung for two-up riding, it'll be way too stiff. When I'm two-up traveling with luggage, I swap my Penske...

Didn't the Rolling Stones blow a 50 amp fuse in You Can't Always Get What You Want?

The projections on the earplugs are soft silicone, YMMV of course but I have never even felt them. The whole launcher thing to shove...

Goop/Shoe Goo/E6000. It will NOT let go, regardless of weather. Having said that, expect something to be damaged if you have to tear...

Did you lose the ball bearing?

Interesting. I've never heard of that brand of shock.

No doubt! Several times it has let go and I feel it hanging/bouncing around with only the wire for the microphone keeping it from being...