RossKean's latest activity

All kinds of aftermarket brake levers. Have you tried the range of adjustment on the OEM levers?

Very little drama involved. Probably a good idea to do it at least a few times so you know what to expect when it is activated in an...

I never activated the ABS on the road in the 47,000 miles I’ve ridden it, bought the bike with 38,000 miles on it in 2019. I flushed the...

May not be a problem at all. He needs to test it on the road and see if it actuates. He did manage to actuate it using the jumper...

You did a nice job on that. Even two (opposing) teeth would be enough given the relatively low torque. I thought about going to the...

Thanks RossKean for digging up those threads. I’ll do some more testing next week with pedal stomping.

I could have sworn I saw that somewhere but I just looked and can't find it either. My eyes may be older than yours! Edit - did a...

How close are you to the border - ND or MN? I am in New Brunswick but less than 90 minutes from the border. Often cheaper to arrange...

Spendy, but consider a custom Russell seat. They can be built with inner springs for heavier riders.

How fast were you going? There is a threshold speed below which ABS won't activate. Maybe 5 MPH? Don't remember... Edit: Or maybe not...

Don't know if it actively pumps fluid or if it is just opening and closing the valves...

You could use a switch to flip them manually but, I wanted them to flip automatically. That's why I used the Clearwater Lighting pigtail.

Pump and float. There is a "Wiper" attached to the float arm and a segmented resistive plate. Could be that the arm is bent or blocked...

I have a 2011 (same colour), but with 160,000 km (100,000 mi). Not quite showroom, but not bad... Welcome from New Brunswick.

Aftermarket custom seats are often built on an OEM seat pan. Crocodile seat cover was never a Yamaha option!