HaulinAshe
Well-known member
After almost an entire week of searching locally for a suitable product, I finally ran across this item at a small NAPA parts store.
NAPA 727509 Heat shield sleeving for plug wire
It is VERY expensive, $59 for 12 feet. But you will spend $90 buying a 50' piece of heat resistant wire loom from most online sources. The worst thing is leaving the bike opened up while you wait on UPS!
I realize that a long piece of heatshrink tubing could also be used. But that was not available locally either. The NAPA material is certainly several grades better in terms of heat shielding and abrasion resistance. So if you are truly anal about the life expectancy of your wiring jobs (as I am), try this stuff.
Jeff
NAPA 727509 Heat shield sleeving for plug wire
It is VERY expensive, $59 for 12 feet. But you will spend $90 buying a 50' piece of heat resistant wire loom from most online sources. The worst thing is leaving the bike opened up while you wait on UPS!
I realize that a long piece of heatshrink tubing could also be used. But that was not available locally either. The NAPA material is certainly several grades better in terms of heat shielding and abrasion resistance. So if you are truly anal about the life expectancy of your wiring jobs (as I am), try this stuff.
Jeff