Rumble Strips

GunMD · Jun 19, 2007

On the recommendation from another thread on this forum I purchased a Rumble Strip for my helmet.

After 400 miles over two days with varied roads (two lane, freeway, city) at varied speeds, here are my thoughts:

Helmet brand: Shoei

Helmet model: Z-II Viking

Windshield: Stock (2005)

Windshield position: Various

Top case: None

Passenger: None

Sustained freeway speed: Avg 80mph

Sustained two-lane speed: Avg 90-95mph

Change in noise level: None

Change in buffeting behavior: None

I couldn't even tell that this thing was installed.

It should be noted that my helmet has vents in the "ideal" area for the Strip to be installed so I was forced to install it on an area just forward of the ideal location.

YMMV.

EDIT: Added photos

Mike-H · Jun 19, 2007

Got pictures of your rumble strip installed on your helmet?....inquiring minds would like to know...

GunMD · Jun 19, 2007

Mike-H said:
Got pictures of your rumble strip installed on your helmet?....inquiring minds would like to know...

I'll take a couple of pics later and throw them up here for ya'll to see.

GunMD · Jun 19, 2007

Photos added in first post of thread

twowheelnut · Jun 19, 2007

I've used it. Have had them for many moons. I find that it helps the pillion more than the rider, but I have also benefited from it, especially while on the Wing (the most horrid aero package extent).

Edit: Yo, numbnuts! Move it further forward. You have it placed too far back. It should be at the very topmost part of the helmet.

Edit edit: I see you made that statement. Still... numbnuts.

GunMD · Jun 19, 2007

Since the Rumble Strips didn't work out as I had hoped I'm going to try this next...

wait for it....

wait for it.....

Harry%20RS%20Helmet%20mohawk_310x310.jpg

twowheelnut said:
I've used it. Have had them for many moons. I find that it helps the pillion more than the rider, but I have also benefited from it, especially while on the Wing (the most horrid aero package extent).
Edit: Yo, numbnuts! Move it further forward. You have it placed too far back. It should be at the very topmost part of the helmet.

Edit edit: I see you made that statement. Still... numbnuts.

Hey, I may be a numbnuts but I can still follow the directions. The included instructions (and the web site) said:

Where on the helmet should the Strip be placed?
Our instructions with the packaging say to find the top of the helmet when you are in your riding position and place it about 2-4 inches behind that.

twowheelnut · Jun 19, 2007

GunMD said:
Hey, I may be a numbnuts but I can still follow the directions. The included instructions (and the web site) said:

Where on the helmet should the Strip be placed?
Our instructions with the packaging say to find the top of the helmet when you are in your riding position and place it about 2-4 inches behind that.

Click to expand...

Still, it works better at the top, IMO. But whada I know? I like to fiddle with my suspension and other weird ****, too.

GunMD · Jun 19, 2007

twowheelnut said:
Still, it works better at the top, IMO. But whada I know? I like to fiddle with my suspension and other weird ****, too.

Different positions for different folks, I suppose. https://www.scottwright.net/smileys/***.gif

After reviewing some of the FAQs on the web site it seems that they encourage you to place the strip farther back for noise control and farther forward for buffeting control. Noise was my main issue, so I may have been OK going that far back. Then again, it aint workin fer me.

twowheelnut · Jun 19, 2007

GunMD said:
Then again, it aint workin fer me.

They have pills for that now, you know...

Mike-H · Jun 19, 2007

Just got popcorn....did I miss anything :huh: ?...

GunMD · Jun 19, 2007

twowheelnut said:
GunMD said:

Then again, it aint workin fer me.

Click to expand...

They have pills for that now, you know...

I thought I had to be your age before I could get a prescription for those. :dntknw:

twowheelnut · Jun 19, 2007

GunMD said:
twowheelnut said:

GunMD said:

Then again, it aint workin fer me.

Click to expand...

They have pills for that now, you know...

Click to expand...

I thought I had to be your age before I could get a prescription for those. :dntknw:

Nope. Numbnuts can occur at any age.

TruWrecks · Jun 20, 2007

Try removing your windshield and see if it's still too noisy. If it gets quiet the noise is coming from the windshield air stream. I put two 7/8" spacers under the front mount of the windscreen. It brought the noise level from the windshield a significant amount.

ngarider · Jun 26, 2007

Schuberth C2, stock windscreen

Just on the off-chance that this thing would help the buffeting I get with almost anything but the full down position, I too tried this little gadget.

I agree wholeheartedly with GunMD's assessment:

GunMD said:
Change in noise level: NoneChange in buffeting behavior: None

I couldn't even tell that this thing was installed.

Rumble Strips

Help Support Yamaha FJR Motorcycle Forum:

GunMD

Well-known member

Mike-H

Independent

GunMD

Well-known member

GunMD

Well-known member

twowheelnut

R.I.P. Our Motorcycling Friend

GunMD

Well-known member

twowheelnut

R.I.P. Our Motorcycling Friend

GunMD

Well-known member

twowheelnut

R.I.P. Our Motorcycling Friend

Mike-H

Independent

GunMD

Well-known member

twowheelnut

R.I.P. Our Motorcycling Friend

TruWrecks

Still chewing thru the Restraints

ngarider

Ride More, Talk Less

Similar threads

Latest posts

Rumble Strips

Help Support Yamaha FJR Motorcycle Forum:

Well-known member

Independent

Well-known member

Well-known member

R.I.P. Our Motorcycling Friend

Well-known member

R.I.P. Our Motorcycling Friend

Well-known member

R.I.P. Our Motorcycling Friend

Independent

Well-known member

R.I.P. Our Motorcycling Friend

Still chewing thru the Restraints

Ride More, Talk Less

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!