skyway
Well-known member
IMPORTANT UPDATE FOR 4" FUEGO OFF-ROAD LIGHTS
Dear Valued Customer,
In our continuing effort to provide you with the best possible products for your off-road vehicles, we are issuing this update bulletin for our Fuego series of performance off-road lighting. Recently it has come to our attention that when used over an extended period of time in extremely wet conditions, water can penetrate the Fuego o-ring seal allowing small amounts of moisture to accumulate behind the lens.
To solve this, we are providing upgraded o-rings to better seal your lights along with detailed installation instructions. These o-rings are provided at no charge. Note that this update only pertains to the Spot, Driving, and Wide-Driving patterns. It does not pertain to the Wide-Cornering pattern. Also, if you have Soltek clear Lexan guards installed on your Fuego lights, water cannot enter as the guard also serves to seal them.
If you do not feel comfortable performing this task yourself, please send or bring your lights to the address shown below to have this service performed at no charge. Please include your full name, return address, daytime phone number, & email address. We will turn them around in approximately 1 business day. Actual shipping charges will apply.
If you have any questions or concerns please feel free to contact us at 760.560.2252 or [email protected].
Thank you,
Soltek Lighting Systems by Baja Designs Inc.
Baja Designs Inc.
185 Bosstick Blvd.
San Marcos CA, 92069
Note: Installation instructions will be included with the new O-rings. If you would like to recieve them via e-mail to determine whether or not you wish to perform the upgrade yourself please contact: [email protected]
Dear Valued Customer,
In our continuing effort to provide you with the best possible products for your off-road vehicles, we are issuing this update bulletin for our Fuego series of performance off-road lighting. Recently it has come to our attention that when used over an extended period of time in extremely wet conditions, water can penetrate the Fuego o-ring seal allowing small amounts of moisture to accumulate behind the lens.
To solve this, we are providing upgraded o-rings to better seal your lights along with detailed installation instructions. These o-rings are provided at no charge. Note that this update only pertains to the Spot, Driving, and Wide-Driving patterns. It does not pertain to the Wide-Cornering pattern. Also, if you have Soltek clear Lexan guards installed on your Fuego lights, water cannot enter as the guard also serves to seal them.
If you do not feel comfortable performing this task yourself, please send or bring your lights to the address shown below to have this service performed at no charge. Please include your full name, return address, daytime phone number, & email address. We will turn them around in approximately 1 business day. Actual shipping charges will apply.
If you have any questions or concerns please feel free to contact us at 760.560.2252 or [email protected].
Thank you,
Soltek Lighting Systems by Baja Designs Inc.
Baja Designs Inc.
185 Bosstick Blvd.
San Marcos CA, 92069
Note: Installation instructions will be included with the new O-rings. If you would like to recieve them via e-mail to determine whether or not you wish to perform the upgrade yourself please contact: [email protected]
Last edited by a moderator: