Jdog's bike video setup

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jdog109socal

The Video Dude
Joined
Oct 2, 2005
Messages
402
Reaction score
9
Location
Ventura, CA
Well many keep asking about my set up. Well here it is the bike and its video setup.

I used Vegas 7.0 movie studio to put this flick togather. This is the first time ive gone into depth using Vegas software...







Jdog

 
Dude, that is trick. I have never seen that many cameras on a bike before. I like it. Maybe one of these days I can score some of this stuff. I like the switch to determine which bullet cam feeds the main camera. I never thought about that before and always wondered about feeding more than one bullet camera.

Very nice,

Bryan

 
Jdog, if I was to buy a setup like that, do you mind telling what it would cost??? Was the control center hard to build?? Would you build another for a fellow FJR guy?? Thanks for any info, Smitty

 
Jdog, that was sweet! Thanks for sharing your rig.

So the stem mount is the recorder and the other cams feed video to it through your switch box?

What brand/resolution/etc. are the lipstick/bullet cams?

Well Done Bro!

 
Jdog, that was sweet! Thanks for sharing your rig.
So the stem mount is the recorder and the other cams feed video to it through your switch box?

What brand/resolution/etc. are the lipstick/bullet cams?

Well Done Bro!
What ya think Matt... I need that stuff....Smitty :dribble:

 
Matt,

480 Line res . Bullet Cam's. 2 cam's are from Bulletcam.com. the other 2 i got off ebay... they are Bestem 480 Line Cam. those two are the cams on the sides of my bike. As you can see they pick up alot of light and video turns out a bit on the yellow side but easy to fix using Vegas software... They work good at night...

The box is one i made on my own and is pretty dam tough, I have put it to the test on my bike and have had no prblem with it..(Wish i could keep the front tire down on my FJR) :blink:

I have been testing it out for about a a year now.

Matt. Yes, The cable that goes in to AV iput come out and goes into the box. Then from there it goes through the switchs and out the each cam.

Jeff aka Jdog

 
the other 2 i got off ebay... they are Bestem 480 Line Cam. those two are the cams on the sides of my bike.
And in a wonderful economy of design, they do double duty as TOGs? :D


Yep i have done that already. Cut wire off cam and smashed fron lens... Best about that is the camera is way inside the tube. I just replaces cable and lens, Still working great.... Note the bullet cam on the side are only 120.00 each....replacment is cheap if need be...

Jdog

 
Jdog, if I was to buy a setup like that, do you mind telling what it would cost??? Was the control center hard to build?? Would you build another for a fellow FJR guy?? Thanks for any info, Smitty

Dam Smitty,

I had 2 new control boxes with me when i met you. I also has a 2 switch box with me. I forgot all about them..

Jdog

 
Last edited by a moderator:
Top