Great PCIII map for 06

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
C

csanders99

Guest
Hey all, I just got a few maps from Quicksilver for the PCIII, he sent me Wally's map and a Holeshot map, I liked both. However I found Wally's to be too restrictive at high RPM's but I liked the throttle response. The holeshot was incredible at high throttle openings but stumbled a little off idle. So I decided to take the 0-2500 RPM readings from Wally's and pasted them into the holeshot map, the result......... :yahoo:

Smooth off idle throttle and incredible power! BTW it was necessary to converted both of the maps to run on the 06 with a little copy and pasting.

Another BTW... I have Two Brothers pipes, no O2 and stock Air filter.

:lol: :clapping: :yahoo:

 
Hey all, I just got a few maps from Quicksilver for the PCIII, he sent me Wally's map and a Holeshot map, I liked both. However I found Wally's to be too restrictive at high RPM's but I liked the throttle response. The holeshot was incredible at high throttle openings but stumbled a little off idle. So I decided to take the 0-2500 RPM readings from Wally's and pasted them into the holeshot map, the result......... :yahoo:
Smooth off idle throttle and incredible power! BTW it was necessary to converted both of the maps to run on the 06 with a little copy and pasting.

Another BTW... I have Two Brothers pipes, no O2 and stock Air filter.

:lol: :clapping: :yahoo:

Any chance that you could make that available for download? Especially in the '03-05 format?

 
Hey all, I just got a few maps from Quicksilver for the PCIII, he sent me Wally's map and a Holeshot map, I liked both. However I found Wally's to be too restrictive at high RPM's but I liked the throttle response. The holeshot was incredible at high throttle openings but stumbled a little off idle. So I decided to take the 0-2500 RPM readings from Wally's and pasted them into the holeshot map, the result......... :yahoo:
Smooth off idle throttle and incredible power! BTW it was necessary to converted both of the maps to run on the 06 with a little copy and pasting.

Another BTW... I have Two Brothers pipes, no O2 and stock Air filter.

:lol: :clapping: :yahoo:

Any chance that you could make that available for download? Especially in the '03-05 format?
+1

I'd like to try them out. I've only used the stock map.

 
Wally's map is smooth but my 05 back fires when I let off the gas, would like to try your map if it would gel with an 05, Muzzy 4-1 and UNI foam filter?

Even willing to pay for it if needed.

Gracias

Tmex

 
How do I make the maps downloadable on this post? I don't have a web page so I'm not sure.

 
Thanks to both of you! I've been hoping for a better map to try out.I had mine dyno-tuned and I think he just went after big #'s and did very little with the bottom end where the troubles are.Thanks again!

 
Anyone have the 2006/2007 Muzzy map for their slip-ons? I emailed them after I didn't see it on their web site and haven't received a response. I'm interested in seeing how it compares to the maps above.

 
So which map is for the 06/07 or are they all for the 06/07?

I lost track when the 05 was listed.

Thanks in advance.

hh

 
The maps bmwhd posted are for the 06, they will not work on an 03-05. I converted 03-05 maps into the 06 format. The 03-05 holeshot map is available from the PCIII website and Wally's is available on this forum or PM me with your email address, I still have the 03-05 version plus a few others that Quicksilver sent me.

 
Big Thanks to csanders99 for converting Wally's map to the '06 format (duh - why didn't I think of that) - and to bmwhd for hosting the maps. I just thought I had this thing running smooth after using Rad's latest TBS sync method, but this was the final touch. I now have almost zero vibration/buzziness - especially at 4000-4200 rpm.

Thanks again! :yahoo: :yahoo: :yahoo:

 
I made a combined map (Holeshot/Wallys) last year, Mine however switches at the 3500 rpm level. I know Bounce has used it, but never got any feedback from him on it.

 
See post above, the maps bmwhd posted are for the 06/07, the combo map is the one where I pasted the first 0-2500 rpm readings from Wally's map into the holeshot map, that's the one I'm running now.

 
See post above, the maps bmwhd posted are for the 06/07, the combo map is the one where I pasted the first 0-2500 rpm readings from Wally's map into the holeshot map, that's the one I'm running now.

For those who are using the Wally's smoothness map, do you have "accelerator pump" enabled also. Looking at the first column of the map, it looks like it might do the same thing as AP.

 

Latest posts

Top