lrider
Well-known member
Thanks Leo
Last edited by a moderator:
-
If you have bought, sold or gained information from our Classifieds, please donate to FJRForum and give back.
You can become a Supporting Member or just click here to donate.
High Way Peg Mounts
- Thread starter lrider
- Start date
Help Support Yamaha FJR Motorcycle Forum:
Thanks Leo
cota95
RI Beach Pop
I saw these at EOM and they nice mods.
sumotony
Well-known member
Fairlaner
The Bartender Whisperer
cota95
RI Beach Pop
Last edited by a moderator:
Knifemaker
Not me
Those look nice, I have Skyways aluminum sliders...
So how much? and do you include pegs with them?
KM
So how much? and do you include pegs with them?
KM
TheAxeman
Well-known member
I bought a pair of them from him at EOM and can attest to the fact that they are very nice and very well made. You have to drill and tap the sliders and he provides 4 stainless steel set screws (2 per) that thread into the sliders and contact the peg mount which you dimple slightly with the drill. The screws get placed at a 4 o'clock and an 8 o'clock position on the slider so you can't really see them unless you are drunk and laying down next to the bike. He does not provide the pegs. I happened to have a pair of old Hardley pegs sitting around and they fit perfectly but it is another cost to take into consideration.
Last edited by a moderator:
05fjrBluedevil
Well-known member
Last edited by a moderator:
Whip
Well-known member
PM...sent.
Whip
Whip
I JUST RECEIVED MINE FROM LEO THIS WEEK, AND WILL POST A PHOTO AS SOON AS I GET MY PEGS MOUNTED. I HAD A DIFFERENT BRAND OF SLIDERS, AND SENT THEM TO LEO. HE BUILT THE ADAPTORS, AND HAD THEM BACK TO ME IN ONE WEEK! THE WORK WAS EXCELLENT. THANKS, LEO. Phil
JamesK
Got to ride
Does anyone know where I can buy the exact pegs depicted in the photo?
painman
Well-known member
Just a guess but would think J&P or Dennis Kirk, or your local stock Harley peg. I use the Iso-Peg by Kuryakyn. PM. <><Does anyone know where I can buy the exact pegs depicted in the photo?
fjr eh
Well-known member
Does anyone know if these foot peg adapters will work on a 2005 FJR with Moko sliders that have been change over to Skyway's sliders?
Thanks,
Mark
Thanks,
Mark
Seems to me that on the '03-'05 FJR, mounting the highway pegs to a Moko or similar slider may be an uncomfortable location.
fjr eh
Well-known member
My last Fjr had RG sliders.
The pegs would mount in the same location as the sliders.
I don't remember were they came from, but they worked well.
I'll check the location and heed your advise.
Mark
Do you know who makes this set up? I wonder If they will work on an 08?
twowheelnut
R.I.P. Our Motorcycling Friend
That's the Fairlaner Special - a one off.
cota95
RI Beach Pop
Similar threads
