Rocnsanman's latest activity
Help Support Yamaha FJR Motorcycle Forum:
-
Rocnsanman reacted to SkooterG's post in the thread Suspension - Rear Suspension Removal and Upgrade with
Like.
Interesting. That is against what has been conventional wisdom. Were you able to get them both out without removing the fender because... -
Those are remarkably ugly. Don't blame you for getting them replaced ASAP!
-
I believe that Yamaha came out with the "blue dot" CCT late in the 2007 model year or perhaps early 2008. My 2007 had the old style...
-
That’s exactly why I chose the FJR. Just want a little more comfort without sacrificing speed or performance.
-
It's not! While I am sure your VFR is faaaaast, I'm not sure the FJR is much of a downgrade.
-
warm the area of the middle bushing (just under where the fork seal was) with a torch, use MAPP gas cylinder for best results. Only...
-
Rocnsanman reacted to torch's post in the thread Shad won't sell tank bag rings individually - must purchase bag to get ring! with Like.
Is this what you are looking for...
-
If they are all still in spec, I wouldn't touch them until the next check, unless you are planning a lot of riding in the upcoming...
-
The Yuasa YOU have to fill is a YT14B-BS .... made in USA. All year FJR use the same size battery as reviews are the OEM GT series...
-
Rocnsanman replied to the thread Old new member.Hello Lester, Welcome and good to have you aboard. 78 and still riding, very cool! You have me beat by 6 years. You are correct, a lot...
-
Update on the new to me ‘18: It’s almost ready for LD Riding comfortably:
-
Rocnsanman reacted to fastpappy's post in the thread ABS & Rear brake issue- Post front caliper rebuild with Like.
From the FSM Left Front Right Upper Right Lower Rear.
-
Rocnsanman reacted to RossKean's post in the thread ABS & Rear brake issue- Post front caliper rebuild with Like.
Yes. Just in the habit of doing the one furthest from the master cylinder first. I have never used a Mity-Vac (or Speed Bleeders) for...
-
Rocnsanman replied to the thread ABS & Rear brake issue- Post front caliper rebuild.I think you guys pretty much all have it right. The only thing I would add it to make sure that the rear brake has sufficient grease on...
-
Rocnsanman reacted to Whooshka's post in the thread ABS & Rear brake issue- Post front caliper rebuild with Like.
There is a very specific procedure for a proper bleed. And the FJR needs to have it followed to help eliminate any issues. Bleeding...