RossKean's latest activity

Wow, that was difficult, but I finally got pretty good at checking the position of the cams, even the exhaust. Valves checked and...

ES or A model? How many miles? Pictures? Welcome!

Hello everyone, thanks for bearing with me. I checked the fuel pressure and it was reading 0 psi even though when I had flow when the...

Good idea to get it all done at once. With the screwdriver, after retracting the CCT and attaching the vice grip, I think I used some...

If they are all at the minimum, I would probably center them all - or even to the 70% of max. (0.009 Exhaust and 0.008 Intake) With the...

For two-up touring, you might want to consider an aftermarket seat. Possibly a different windscreen as well. Where are you located...

Are all four header pipes the same temperature (or at least close) while it is running badly. First thing I might look for is a plug...

No major issues with 2013 except a recall for the front brake switch. It was the first year of the Gen III FJRs. The cruise control...

Except that the brake light doesn't function unless the ignition is on (at least mine doesn't). Yes, a good idea to verify parasitic...

Other big hydrogen problem is storage. Very high pressure to get any amount of hydrogen on board and that means HEAVY steel tanks...

Has the ignition switch recall been done? A possible source. With respect to the battery mysteriously draining, try checking...

I wasn't sure if that would give you enough "resolution" to see if you were off by one tooth. The one time I messed up my cam timing...

I’m convinced I did get the chain off by a tooth. BIG mistake on my part. Now I don’t have the confidence or probably the skills to...

Valve cover and timing cover have to come off. At TDC, reference lines on the outside of both the cam gears have to line up with the...

Agree! Certainly can't hurt.