Whooshka's latest activity

You gave the line to the E251 but forgot the link to the write-up. ;-)

Here is a write up of what I did to mount a Givi Monokey top box to a Yami aluminum rack. The "toilet seat" plate has since been...

Gen I uses the GIVI SR346 rack. (SR357 is for all Gen II +)

That probably won't work for his 2003.

You need to first determine what brand of case you want. Yamaha, Shad, Givi, etc. They all require different mounting plates. And you...

No expert here But you changed the dogbone length by 16 mm x 2 (2:1) = 32mm which is approx . 1.33 inches.

Sunday, 10/6/2024 As the sun rose this morning, the Michiganders headed out. d-eagle on his 'Wing. As well as extrememarine and...

I ride with a rear topcase about 20% of the time when necessary. Do I feel the weight back there? You betcha! Do I feel the topcase...

Come on now! At least use a couple of wraps of duct tape to protect the wheels. Anybody knows that much!

I'll need a day to get them off the shelf, measure and weigh them. It's gonna be an odd shaped box. Finding/making a box that size is...

That measurement won't be accurate as suspension sag/spring setting could be different on each bike.

I've got a very nice pair off of my '015 with less than 11K miles on them. I'd be looking for $200 but shipping them would probably...

Hmmmm, put up a want ad then not come back for 2 weeks. :confused:

Different part numbers. I acquired a set of adjustable dogbones from Dodger. I do love this forum!

It’s a long slight hander into a sharper ending Depending on speed arguably dual apex. Forgot to note direction of travel was too...