Whooshka's latest activity

Bump to the top.

Oh, me of little faith. I found that when I connected the carbtune device I accidentally knocked off a separate vacuum line on number 1...

🤣🤣🤣🤣

Some are getting dangerously close to this :p😆

I think you are correct. I was counting from original helibar position I’m really upright now, no sliding toward tan

"I gained about 3 inches up and 3 inches back" I think you've underestimated. The Helibar alone is 1 up and 3 back. Add that Rox...

If the aftermarket seat is made correctly there will be no sliding forward towards the tank.

The OP wasn't specific if it was the spacers in the front or rear. Either one would create so much scraping noise from pad on rotors...

I recently did a 200 mile ride, the last 10 miles or so the CEL, Traction Control and ABS lights all came on. Pulled over and noticed...

Ok, I think the issue was the collars were on the wrong sides of the hubs. All lights went out except the engine which I think needs...

Took what? The whole bike or just the wheels? The tires may be rotating in the correct direction but are they mounted on the rim in...

How about the sensor in the rear? That ABS plate has to be aligned right also.

Hello everyone, thanks for bearing with me. I checked the fuel pressure and it was reading 0 psi even though when I had flow when the...

My money is on the ABS sensor also, it's probably just dangling. Also did you use anything magnetic near the sensor ring?

A little background please, did you change the tire yourself? Or did a shop change the tire? Is this the first time you have removed /...