Whooshka's latest activity

Ive known Dan for almost 4 decades he was not "Chastising" but pointing out what the OP was asking with no direct answer. You did make a...

Any related info may be helpful. Chastising us for not directly answering the OP's question isn't particularly helpful either.

That would be a mistake Dan has 20 years experience with FJR1300 maintenance. But you do what you think is best good luck in the...

OK so I'm guessing that black puck was not black until it was hit with penetrant and a propane torch. I don't know what the pucks are...

Yes, the piston seals on the assembled caliper are definitely chewed up. Looks like corrosion on the pistons as well. If not deep, the...

That stuck gunk looks like the piston seals. You're gonna have to do a complete rebuild. I'd avoid using a sonic cleaner on calipers...

Christmas present for the same guy I made the chefs knife for in post #68. 5” Santoku. AUS10. Same wood (African Paduak) This wood...

85/150? Sure that's not a gear oil for the final drive? EDIT: Never mind, I see it is a 5wt.

Good one

And I thought she was gonna be doing time behind bars. :LOL:

From the title I thought this was going to be a barter thread. ;)

I've never replaced a coolant reservoir on any of my FJRs. Including the 21-year-old one, and the two 15-year-old one's....... Sure...

What that fart smeller above said. Also, I always fill my reservoir a little above the 'full' line. I don't think I have ever puked...

Note: Make sure that the overflow hose to the reservoir is directed to the bottom of the vessel and is not kinked. Make sure the cap to...

If you put coolant in the reservoir, when the engine goes through a heat cycle, coolant should be pulled back into the radiator. That...