Parts For Sale Misc Stuff

Whooshka · Jan 26, 2025

Trying to clear out some boxes off a shelf and came across the stuff below. All came off of or are for a Gen 3. non-ES

Prices do not include shipping but most should fit in a padded mailer from 08361.

Garmin Zumo 550. Worked just fine, I replaced it with an Apple Car Play unit. Includes sunshade and cradle. $90 ( and if I can find the box there are some spare parts like cradles, cables, etc.)

Relay arm A model not ES. Bearings all move smoothly. Great candidate to be sent off to get zerks installed. $40 * SALE PENDING *

Oil filler caps $8 each

Brake and clutch reservoir covers with screws $10 each

Stock dog bones. $15

Front reflectors. $10

~~Black 83 degree valve stems. $15~~

SkooterG · Jan 27, 2025

Can't quite tell from the photo - do the valve stems have caps? Do you know what brand?

Brian Cooper · Jan 27, 2025

Hi I'm interested in the Garmin GPS if it has maps for both Canda & the USA.

Whooshka · Jan 27, 2025

SkooterG said:
Can't quite tell from the photo - do the valve stems have caps? Do you know what brand?

I gotta dig them out of the box and look, I don't remember.

Whooshka · Jan 27, 2025

Brian Cooper said:
Hi I'm interested in the Garmin GPS if it has maps for both Canda & the USA.

It does not. I have basically the east coast of the U.S. loaded on it, never needed to load Canada. I know you can wipe off what I have and load what you need. Palm Doctor can upgrade the memory fairly cheaply to load larger map areas. I do have a memory card in in (I think 128G if I remember right) but could never figure out how to load maps to it. Not even sure if you can, it may be just for music and photos. Again, not sure.

https://www.palmdr.com/cart/garmin-...e-p-368.html?zenid=safurcvhsjctm2h0579lals8n5

Brian Cooper · Jan 27, 2025

Thank you for your response. I live in Western Canada and I often ride the Western U S States, so unfortunately, I would not use maps of the Eastern USA. The cost to purchase maps from Garmin is a bit pricey, so I might be better served to just buy a new unit loaded with the maps that I want. I wish you success in selling your GPS, however If you don't find a buyer feel free to contact me directly at my Arizona number (480) 380-1684 and perhaps we can make a deal. Thanks again.

Whooshka · Jan 27, 2025

Brian Cooper said:
Thank you for your response. I live in Western Canada and I often ride the Western U S States, so unfortunately, I would not use maps of the Eastern USA. The cost to purchase maps from Garmin is a bit pricey, so I might be better served to just buy a new unit loaded with the maps that I want. I wish you success in selling your GPS, however If you don't find a buyer feel free to contact me directly at my Arizona number (480) 380-1684 and perhaps we can make a deal. Thanks again.

No problem, I totally understand. Been so long since I changed the maps I didn't even remember Garmin charged for them.

wisdomrider1 · Jan 28, 2025

I still use the Garmin Zumo 550 and update the maps all the time. You can update the maps to a 4 GB Memory Card using a Cloning Procedure. I believe the maximum size is 4 GB for the Zumo, so it probably doesn't work with a 128 GB size. You most likely could fit Canada and Northern USA. Anyway, you can follow the link below to obtain the Cloning procedure if still interested:

http://www.poi-factory.com/node/39231

Whooshka · Jan 28, 2025

wisdomrider1 said:
I still use the Garmin Zumo 550 and update the maps all the time. You can update the maps to a 4 GB Memory Card using a Cloning Procedure. I believe the maximum size is 4 GB for the Zumo, so it probably doesn't work with a 128 GB size. You most likely could fit Canada and Northern USA. Anyway, you can follow the link below to obtain the Cloning procedure if still interested:

http://www.poi-factory.com/node/39231

Ahhh super helpful. Thanks much! Gonna have to play with it now.

Whooshka · Jan 29, 2025

SkooterG said:
Can't quite tell from the photo - do the valve stems have caps? Do you know what brand?

I found the caps. Gotta be honest, one of the valve stems seems "bent" or out of round where the cap screws on. Just doesn't look right. So I'm taking them off the table rather than sticking somebody with a bad item.

If you have bought, sold or gained information from our Classifieds, please donate to FJRForum and give back.

Parts For Sale Misc Stuff

Help Support Yamaha FJR Motorcycle Forum:

Whooshka

Well-known member

SkooterG

Purveyor of Crooked Facts

Brian Cooper

New member

Whooshka

Well-known member

Whooshka

Well-known member

Brian Cooper

New member

Whooshka

Well-known member

wisdomrider1

Member

Whooshka

Well-known member

Whooshka

Well-known member

Similar threads

Latest posts