Search results

I'm not really sure. Probably about 50%-ish if I remember. I played with the light level when I installed them and pretty much left it alone ever since.

Easy to mount everything. Wiring was a touch harder as I had to insert the harness between the headlight connector, and took removal of the dash plastics and I think I opened up the nose cowling as well. Connection to the horn was easy, a couple of taps into the horn wiring. I mounted the...

Clearwater Darla on my '21 ES, fender mounted

No zerk fitting, one of the other forums has details on one person who disassembled the u-joint and greased everything, but it's like a car, you have to press out the bearing cups to grease it.

I have a copy at home, I'll try and remember to link a copy tonight

For guards, there's T-Rex and R-Gaza. T-Rex, made in Texas, R-Gaza made in Russia. I know what my choice was.....

Shad D1BTRPA Shad SH58X Yamaha 1MC-F48D0-V0-00

I too went with the Shad 58X, but upgraded to the aluminum Shad mounting plate attached to the Yamaha aluminum rack.

That a capital NOT.....

Denali just sent out an email about similar lights. Check their web site....

If you do move it to under the headlight, don't mount it in the center, it will impact the fender under extreme compression. Mount it offset to one side.

Here's the post I made detailing the process, parts, and diagram https://www.fjrforum.com/threads/sts-turn-signal-harness-for-gen-3-fjr1300.178823/#post-1444624

No, I had a power lead already pulled forward from my Fuzeblock, so I used that power connection.

Here is what I ended up with when I built a harness for my '21.

Corbin Front saddle w/ heat, 2006-2023. Picked this up in a horse trade, and since I already have a Laam, I'm selling this one. Appears to be (very) lightly used, no tears, all stitching intact. Tested the heating element and it works. There is one mark towards the front of the seat, looks to be...

For us in the states, here is a very similar item at Amazon: https://www.amazon.com/Yosoo-Universal-Cabinet-Cupboard-Kitchen/dp/B01NAJDZ0P

Welcome from Virginia!

Here are the details on making your own Gen III harness. I made one for my 2021. https://www.fjrforum.com/threads/sts-turn-signal-harness-for-gen-3-fjr1300.178823/#post-1444624

Price drop $55 plus the ride

Forgot the price, doh. I added it to the post.