Search results

OK now the less glamorous, but equally important general cleaning and lubrication… Picking out all the crap stuck in the radiator…note: hose off your radiator after long rides, but don’t use high pressure spray… Warped rear disc rotor….there goes another $200… When...

Finishing up the back end Exhaust system, etc >> (purchased from the board...thank-you Karmak...!) Checking the weight of the stock system>> 14.3 kg = 31.52 pounds Muzzy system weight>> 6.5 kg = 14.33 pounds, a savings of 7.8 kg, 17.2...

Back shock and associated maintenance;

Big Thanks to Jeff Ash for setting up the GB on Race Tech, and to Karmak (Gordy) for the great deal on the Muzzy system. Also shout out to Useless Pickles for advise and wisdom on the new map for the PCIII. The Maintenance schedule that I use is a an excel spreadsheet located here...(thanks to...

Thanks for the help from Useless, as well as others. Useless built a map using Muzzy's '05 map, then Muzzy sent a GEN2 map a few hours later...also got others as well. If you need 'em, PM me....I got 5 or 6 you can try!

Man I wish I was going. Had great seats last year in Barcelona. 180,000 screaming Spaniards ... we were at the end of the first straight, but had great views of 2 big screens, as well as a distant view af a far turn... Race start first corner

I need a PCIII map for a full Muzzy system. I did quite a bit of searching already, and have emailed Muzzy several times :angry: , but all they give me is a map for a GEN1 (05). I have GEN2, 07, so I am guessing it would be differnt....

you can buy disposable lighters with LED lights on them forabout a buck.

so a few lessons learned here; --I should have read a little farther down the list of fuses....signal fuse has nothing to do with the signals. The hazard fuse does... --In any case, fuse was replaced, and blew again --Traced the short to the tail light --Have been using the Kisan...

It's the brake lights and turn signals, front and back. Wonder if it's #4?

Riding home after about 200 miles yesterday, and hit a downpour. Since it was traffic, here in Korea everyone puts on the flashers to slow down. When I did, I got nothing. Pulled the fuse this morning, and it is fine, but changed it anyhow, just to check. No luck. I did have the Brodie ground...

colorite + painting (or makeup) sponges will cover most scuffs nicely without drawing much attention... I have sent a couple of mirrors to Girauld tho... I like the sharpie idea for the 08 &09 crowd....almost enough to think about gettin one.

These plugs do not need extra adheasive or glue. They are the best. This is what they use at the tractor pulls... Nealey Company These are cheap and fit will under the seat, along with my slime air compressor. Can't tell you how many I have helped with this combo (besides myself a bunch of...

I have both and it works just fine. The Randy harness uses the battery for power and ground so essentially there is (almost) no interaction.

Finally got around to installing mine today, and all I can say is that if you have not done so, pull the trigger. Probably more important than a loud set of horns. Noticed a bit more "leeway" when taking a drive this evening....cagers do notice these. No need to spook the neighbors by taking...

Brodie, Thank-you for the superb workmanship once again. Installed my new ground harness this evening (actually, my mechanic did it). My Datel volt readout went up .7 of a volt, and my Honda grip warmers that could not go beyond 2 bars over the last winter were blazing on all 4, even at idle...

Most of the PCS movers I have seen on this end do a great job of crating. Check the straps to be sure they are placed well and guitar string tight. I would strongly suggest additional insurance for your shipment. I paid about $150 for $13,000 worth of cargo insurance from Texas to Seoul Korea...

Nice work....100k is some serious milage. How 'bout the brakes...cam chain tensioner...brake and clutch hoses? You might clean and lube that swing arm pivot bearing as well....

Thought the fork oil was supposed to go after 2 years or 16K? Wouldn't that mean the seals as well?

cheap but effective low risk way to try out a set of custom molded ear buds. Never leave home without 'em...