Search results

As others have said, it's not too bad to get to. Just use a small screwdriver. I was able to just use a screwdriver bit from my ratchet set and turn it with my fingers. Here are Cylinders 1 and 2. The rear of the bike is to the right. Cylinders 3 and 4. I had to move the wire bundle out of...

Cool. It looks like it will work with the Givi SR357 rack, as well.

I had the Sidi Sport until my crash last year. This year I looked at the Armadas, but ended up with the Sidi Canyon GoreTex. The main reason I shied away from the Armadas was because they seemed a bit "gadgety". You have to get through 2 layers to get your foot in. At 4 A.M. getting suited up...

Link You do not need any extra spacers. You just need to pull the spacer from the original mirror. When you pull the original mirror off, look at the two studs at the base. You should find a black rubber pad. Pull this off and put it on the new mirrors.

Wow. Glad you are relatively alright.

I've had them on my old miata. Not a bad set. But most importantly, much louder than the original. Glad they worked for you.

If the bike just falls over on level ground, the canyon cage should be it. However, if the bike keels over downhill like mine did, the bike will tip forward, pivoting on the cage. Upper Edge of the lower cowling (think where the battery sits) and the lower front edge of the mirror is the...

Here's what they look like. They push the mirrors up and out. I can actually see behind my trunk. No more elbows and having to move my head over to see behind. However, the mirrors appear to be a bit shorter and therefore the image is not as wide vertically.

Since I haven't seen anyone post about it... I spent the 15 minutes to replace the mirrors on my Gen3 with the ones from an FZ1 to try to be as cool as you Gen1/2 guys. Studs fit fine. However the indent in the cowl is looking a bit funny. Here is a side by side shot of how the base looks...

End of the video points you to a european website, as well.

This thread becomes sillier with more hard cider.

Sorry to hear. I hope you get better soon. I had an OL (old lady) decide to make a right turn from the middle lane last Dec. I, too, was saved by ATGATT. I can't believe the amount of haggling I had to do with the insurance company over the price of the bike. Sheesh. But I get the...

About 3 months too late for me. Oh, well. Good product and easy to install.

Mine was reversed, as well.

I had the same problem identifying the bolt. I eventually found it after holding up the guard up to the bike. If you line up the front bolt and the umbrella nut, you can see where it is. It took me about 1.5 hours to put all 4 parts on.

Congrats! You're making me miss my VFR. It's a great ride.

I like rice...

The basis for many things farkle.

MBP 13" Retina i5/2.5GHz MBP 13" Retina i7/2.9GHz Both use Intel HD Graphics 4000 GPU which uses shared memory. The upgraded NVidia GPU are only in the 15" models.

FYI, the retina MBPs are not upgradable after the fact as the RAM and SSD is solder directly onto the board. The non-retina MBP use the 2.5" SATA HDD and common SDIMM sticks and therefore one may replace them with 3rd party parts. OWC is another good source. We've been using both RamJet and...