Search results

Sorry for the delay, I was on a three day road trip in southern Colorado and northern New Mexico. Thanks for all the advice and suggestions. The jumper has been removed, and the dip switches are #'s 1,4 and 7 ON and #'s 2,3,5,and 6 OFF. I may have some time tomorrow to try grounding the...

This is a new unit. I have verified all LED tests that I am aware of; everything highlighted in blue below. ROAD TESTING THE CRUISE CONTROL Be sure to fully test all functions of your new cruise control on a level surface away from predestrian and vehicle traffic. While travelling 35 M.P.H...

I have 8-10 in/Hg of vacuum. Servo cable is as tight as it can be while still allowing throttle to return to idle. I have road tested the bike three or four times. Never used the centerstand. Still no cruise...

Thanks for the tutorial! I've looked at the diagnostic LED's and they appear correct. Everything tests well now, not sure why it still doesn't work!

I've been thinking about this, and I haven't been able to come up with an answer. Anyone have suggestions for anything else I can try to get my cruise working?

I'm not sure why I had 0.1V in my circuit, but I worked around it by adding a relay in the brake circuit as shown here: https://www.valkyrieriders.com/shoptalk/cruise-control.htm I specifically used the SPDT setup: https://www.valkyrieriders.com/shoptalk/cruise_files/relay5_diag1.gif So now...

The bike has two coils though, right? Shouldn't either work? Time to remove the fairing. (Edit: Time to go to Home Depot for a box fan. It's 94 degrees in my garage!)

I did not remove the resistor. On my 2005, the one ignition coil that I can see has a gray wire and a red/black wire. Initially I was connected to the gray wire = 11.2V constant. Switched to the red/black wire = 13.2V constant. I can't see the other coil. I may have to take off the right side...

Just found some more information here: https://www.bestbits.org/audiovox_cruise.htm regarding the diagnostic LED inside the main unit and some other wiring shoutcuts (too late for me now!).

Thanks for the link! Ok, I've gone through the troubleshooting, and here's what I've found: the purple wire reads 0.1V with the pedal released. I've looked at both brakes, and the rear actually has a small amount of play before the plunger moves. The front appears to be fully extended when...

Sorry, I thought I was clear. I have vacuum when the bike is running. My reservoir doesn't hold vacuum with the bike off. I would like to fix this, but I don't think it's the issue with the cruise not engaging. I have tried testing the vacuum with the valve both directions. I received no...

I road tested it. No aux brake lights.

Hey all, new member here looking for advice. I have installed the Audiovox cruise control on my 2005 and it isn't working. I followed the excellent write ups of a couple members here but the cruise does not seem to engage. I have lights on the control panel, so I don't think power is the issue...