Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="CGS" data-source="post: 1463344" data-attributes="member: 99967"><p>I have a 2007 FJR with 115000 miles. My rear brakes slowly start to engage while riding without pressing the brakes. Ran it through multiple times of test of the ABS PUMP in diagnostic mode and bled the brakes multiple times. Yet once you start down the road it slowly engages. Either release the pressure at the rear caliper brake line or pump the rear brake hard for it to release.  And there is no ABS light on. Is there a way to just turn off the abs or remove it. Is there anyway to diagnose if it is the pump, a relay or anything else? A new pump is $2k. about half the price of what the bike is worth. The 2006 and 2007 share the same part number and price, yet the 2008 is a diferent part number and is less expensive and also used ones are available. And are they repairable, if that is the issue? I have a mechanic that is stumped. Pulled the rear brake master cylinder and it is fine, checked the rear brake caliper and it is good, bothe received new seals about 9 months ago with no issues. Any help would be appreciated.</p></blockquote><p></p>