Anyone know this stainless bar end-weight?

[extra-ordinary_guy]

I lost one in a spill and would like the same again if possible - does anyone recognise this bar weight?

 

[luvtoride]

Why don't you just weigh the remaining end? Wife's food scale, maybe?

 

[graler]

It looks like the non-throttle side on a throttle-meister.

 

[user 6393]

nope, mine has machined taper out to the end

 

[user 88993]

HVMP?

 

[El Toro Joe]

HVMP?

That's what I was thinking

 

[sapest]

https://www.google.ca/search?q=vortex+bar+ends&rlz=1C9BKJA_enCA590CA590&hl=en-US&prmd=ivsn&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjUiNGj0trOAhUH1WMKHTXmC9wQ_AUIBygB&biw=1024&bih=653#imgrc=cutgT9PI_AA8bM%3A

Perhaps?

-Steve

 

[blassoff]

https://www.google.ca/search?q=vortex+bar+ends&rlz=1C9BKJA_enCA590CA590&hl=en-US&prmd=ivsn&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjUiNGj0trOAhUH1WMKHTXmC9wQ_AUIBygB&biw=1024&bih=653#imgrc=cutgT9PI_AA8bM%3A
Perhaps?

-Steve

Perhaps...HVMP ingraves theirs on the outside (I have a set - doesn't look like his).

 

[escapefjrtist]

Can't tell from the end view...maybe older design FJRGoodies? Very similar to what I've had on my FJR's for years.

--G

 

[airboss]

^^^^

What G said. Had that set on my 06.

 

[Ignacio]

Can't tell from the end view...maybe older design FJRGoodies? Very similar to what I've had on my FJR's for years.
--G

That's what I think was thinking. Top Gun bar-end. Maker (Bill McAvan) is no longer alive, I used to have a set...until my sheep encounter.

 

[rPGoatBoy]

Coulda also been someone with some excess 304 round stock and a lathe.

 

[Bill Lumberg]

Not HVMP.

 

[extra-ordinary_guy]

Thanks for the replies guys -

The weight is 7.7oz. I had originally conrtacted HVMP who had told me that they engrave all their weights. Those 1st gen Top Guns look very similar but from what I've seen of them it looks like the mounting bolt hex head is only a mill or two from the end of the weight whereas the one I have has the mounting bolt recessed way down inside the weight (it's not that clear in the photo). I'll keep looking and maybe I'll have to get someone to make me one up, or else I could go HVMP on a pair as they offered me a discount when I made the enquiry with them

 

[rogdeb]

Can't tell from the end view...maybe older design FJRGoodies? Very similar to what I've had on my FJR's for years.
--G

Correct -- had the same ones on our FJR.