Bolt sizes?

[Stiltz]

I am currently having a Farkle fabricated for my 06. (Details later when the prototype is finished.) I need to know what size the bolts are that go thru the frame members and in the engine block(at least on one side). I have a manual but it is useless for the size, only has torque values. These two bolts can been seen on the 06 at the top of the vent cutout on the side/front of the 06 only.

Someone somewhere has to know. My local "stealership", as usual, hasn't got a clue........HelpPlease.!!

 

[FJRPierre]

Maybe this will work; go to the parts fiche and find the part number

https://www.yamaha-motor.com/sport/parts/home.aspx

then apply the decoder ring eg

913x-05018-xx = 05 is OD in mm and 018 is the length in mm (except where the part number starts with a 901 it is not possible to determine length; OD is still valid)

 

[Stiltz]

Maybe this will work; go to the parts fiche and find the part number
https://www.yamaha-motor.com/sport/parts/home.aspx

then apply the decoder ring eg

913x-05018-xx = 05 is OD in mm and 018 is the length in mm (except where the part number starts with a 901 it is not possible to determine length; OD is still valid)

Thank You Pierre!!!

That did help a lot. "decoder ring"