Brake Lever problem after Lowering Footpegs

[MountainMaxMan]

Hey Guys, I bought a set of MCL lower foot peg adapters for my Gen III FJR and love the feel of being able to stretch out my 36" inseam legs

however i found the RH side peg actually moved out quite a bit as well as down, this is causing me a problem reaching the brake lever, i have to twist my foot in a lot in the front to reach the brake now, is there any wider or offset brake lever I can buy or a Mod I can do to fix this? thanks in advance.

 

[Mihalis fjr]

I have the same problem..I try to find a small extension for the lever but not luck until now...

 

[FJRay]

I took mine off and put in my press and gently bent it out where I needed it. Aluminum bends easy the first time but does work harden quickly so get it where you need it the first time

 

[pista]

I've actually done this mod to my SV and FJR and found that braking "pigeon toed" comes second nature after a couple of days.

Same with the shifter

 

[Bill Lumberg]

After I lowered my lever, I had no problem hitting the brakes. As natural as it was when everything was stock once I found the right notch.