Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Low Level FJR Pilot" data-source="post: 1468252" data-attributes="member: 5871"><p>I started my 2016 FJR 1300 A before I began to tear it down and repair the front stay. I took off my exhaust to put on Two Brothers Carbon Fiber mufflers. I changed the oil, plugs, rear oil, and anti freeze. Then, I removed my K & N air filter, cleaned it out and reinstalled it. The bike is all back together and before I put the pipes back on, I started it to balance out the oil and anti freeze levels. I ended up with a check engine light. After buttoning everything up I ran it again and the light is still on. I believe it was caused by not having the exhaust cans on when I originally started it. How can I reset the light and see if it goes away for good. There are no fault codes. It runs and sounds good with no outlandish noises. All lights and turn signals work, and there is nothing obvious. One other thing I am having issues with is the rear brake goes all the way down when depressed and will not stop the bike. Front brakes work great. I am going to perform a brake and clutch flush but would the rear brake case a check engine light to come on?</p></blockquote><p></p>