daddyman
Well-known member
Umkay, so I was removing some of the 905 crash bars as I had been scraping them, and putting the scoot back together when I noticed that I seem to have, aah, hmm, misplaced, the "engine mounting nut" and "spacer bolt."
<_<
These are referred to in the service manual on page 5-6 and 5-7 as part numbers 15 and 16 respectively, and attach onto the end of part 19, the "engine mounting bolt (rear upper side)."
Alas, I have not been able to locate the part numbers in the OEM part searches online, and searching using the names indicated above has not been any help.
So, can anyone tell me what the heck the part numbers are?
Thanks!
Edit:
Looked again and the spacer bolt seems to still be in place. From what I have picked up in my searches, the nut should be an M10 flanged piece.
The "Frame" fiche has come closest, listing part 18 as simply "nut," but with no size info. It is also drawn coming through from the right, not the left.
<_<
These are referred to in the service manual on page 5-6 and 5-7 as part numbers 15 and 16 respectively, and attach onto the end of part 19, the "engine mounting bolt (rear upper side)."
Alas, I have not been able to locate the part numbers in the OEM part searches online, and searching using the names indicated above has not been any help.
So, can anyone tell me what the heck the part numbers are?
Thanks!
Edit:
Looked again and the spacer bolt seems to still be in place. From what I have picked up in my searches, the nut should be an M10 flanged piece.
The "Frame" fiche has come closest, listing part 18 as simply "nut," but with no size info. It is also drawn coming through from the right, not the left.
Last edited by a moderator: