EBC HH brake pads

[jwhite518]

If one were to buy EBC brake pads, what is the difference between FA252 and FA252HH on an 05 non-ABS?

The local Yammy shop only carries EBCs, have to special order the OEM parts.

 

[E-Ticket Ride]

Not the comparison that you are looking for, but I used the HHs on my old FZ1. They felt good and firm without being grabby. The stock pads had a real grab at low speeds, but would lose grip with some heat in them. The EBCs never felt that way, stopping hard with two-fingers of pressure -- very linear without the low speed grab. They were unaffected by foul weather -- which with the stockers, I always felt were ready to lock with light pressure.

 

[2WheelTiger]

The internet is a wonderful place.

https://www.ebcbrakes.com/mb-streetbikes.html

 

[RsvlFeej]

The local Yammy shop only carries EBCs, have to special order the OEM parts.

OEM lasted 25K miles (2 sets), aftermarket 10K. I'd say see for yourself, then special order your next set.

 

[JerseyEd]

Run the HH pads. I used different manufactures, all the HH pads are better. It will not make a difference until that last turn when you are going too fast and your brakes are too hot.