Fall Tech Meet

[LowAndSilent]

Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.

Adam, I plan on replacing my fork bushings, if your going to do your fork oil I would go ahead and replace the bushings if you have never replaced them. I have the list of parts you will need.

Yeah, I had thought that may be a good idea. Could you send me the list?

Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.

I got you down for the valve check.

Oh, excellent. Thanks, Bryan!

 

[Auburn]

Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.

Adam, I plan on replacing my fork bushings, if your going to do your fork oil I would go ahead and replace the bushings if you have never replaced them. I have the list of parts you will need.

Yeah, I had thought that may be a good idea. Could you send me the list?

Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.

I got you down for the valve check.

Oh, excellent. Thanks, Bryan!

contact Panman for the parts list of whaat you need to have for it.

 

[ahchiu]

Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.

Adam, I plan on replacing my fork bushings, if your going to do your fork oil I would go ahead and replace the bushings if you have never replaced them. I have the list of parts you will need.

Yeah, I had thought that may be a good idea. Could you send me the list?

Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.

I got you down for the valve check.

Oh, excellent. Thanks, Bryan!

contact Panman for the parts list of whaat you need to have for it.

I have a new valve cover gasket #5JW-11193-00-00 so no need to order one

parts list for the forks.

(You’ll need 2 of each)

4SV-23135-10-00 METAL, SLIDE 2 (Lower Bushing)

3P6-23135-00-00 METAL, SLIDE 2 (Middle Bushing)

4SV-23125-10-00 METAL, SLIDE 1 (Upper Bushing)

4SV-23115-00-00 GUIDE, COVER UPPER (Washer)

4SV-23145-01-00 OIL SEAL

4SV-23156-00-00 CLIP, OIL SEAL (Ring clip)

4SV-23144-00-00 SEAL, DUST (Dust seal)

You will also need 2 liter of fork oil

Cost from CyclePartsWarehouse.com is around $65.00 (+shipping)

 

[Panman]

Qty Item Item # PRICE Total

1) 1 TENSIONER ASSY, CAM 5JW-12210-10-00 75.82 75.82

2) 1 GASKET, TENSIONER CA 5JW-12213-00-00 1.14 1.14

3) 1 GASKET, HEAD COVER 1 5JW-11193-00-00 14.51 14.51 Optional

4) 2 O-RING 93210-47675-00 2.02 4.04

5) 3 GASKET, OIL PUMP COV 5JW-15456-11-00 6.47 6.47

Edit

I'm worried about that #4 item part number we want 2 o-rings for the water pipe and when checking numbers I found this # 93210-18417-00 for those. We got the right stuff but that number doesn't check out.

 

[Auburn]

Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.

Adam, I plan on replacing my fork bushings, if your going to do your fork oil I would go ahead and replace the bushings if you have never replaced them. I have the list of parts you will need.

Yeah, I had thought that may be a good idea. Could you send me the list?

Looks like I am late to the party as well. It's getting time for my valve check/CCT replacement, but it looks like I'll have to wait for that. Did you say there would be another group doing them at a later date?

In the mean time, I'll need to clean out my front forks again. Had a nasty leak on my trip to VA (repaired with a Seal Mate) and it'd be nice to get them cleaned out and new fluid in there, just in case.

I got you down for the valve check.

Oh, excellent. Thanks, Bryan!

contact Panman for the parts list of whaat you need to have for it.

I have a new valve cover gasket #5JW-11193-00-00 so no need to order one

parts list for the forks.

(You’ll need 2 of each)

4SV-23135-10-00 METAL, SLIDE 2 (Lower Bushing)

3P6-23135-00-00 METAL, SLIDE 2 (Middle Bushing)

4SV-23125-10-00 METAL, SLIDE 1 (Upper Bushing)

4SV-23115-00-00 GUIDE, COVER UPPER (Washer)

4SV-23145-01-00 OIL SEAL

4SV-23156-00-00 CLIP, OIL SEAL (Ring clip)

4SV-23144-00-00 SEAL, DUST (Dust seal)

You will also need 2 liter of fork oil

Cost from CyclePartsWarehouse.com is around $65.00 (+shipping)

Qty Item Item # PRICE Total

1) 1 TENSIONER ASSY, CAM 5JW-12210-10-00 75.82 75.82

2) 1 GASKET, TENSIONER CA 5JW-12213-00-00 1.14 1.14

3) 1 GASKET, HEAD COVER 1 5JW-11193-00-00 14.51 14.51 Optional

4) 2 O-RING 93210-47675-00 2.02 4.04

5) 3 GASKET, OIL PUMP COV 5JW-15456-11-00 6.47 6.47

Thanks guys. That should help a few folks get the right parts

 

[Auburn]

attendee list updated

 

[juniorfjr]

Bryan, I'd like to attend. If nothing else, I'd love to watch or help a fork flush. Then I can do mine later.

Thanks, Fred

 

[Auburn]

Bryan, I'd like to attend. If nothing else, I'd love to watch or help a fork flush. Then I can do mine later.

Thanks, Fred

got you. There should be at least 2 fork rebuilds going on

 

[velvet fog]

I'd like to attend and observe the valve check and CCT change. I'm due for my first valve check ~27,000 miles after having my tick fixed.

The bike also seemed to be kinda noisy from the cam chain area on a cold start so I may do a pre-emptive CCT change or at least have a bunch of you listen to it and argue about whether or not it's a problem.

 

[Auburn]

I'd like to attend and observe the valve check and CCT change. I'm due for my first valve check ~27,000 miles after having my tick fixed.

The bike also seemed to be kinda noisy from the cam chain area on a cold start so I may do a pre-emptive CCT change or at least have a bunch of you listen to it and argue about whether or not it's a problem.

You have a PM

 

[Auburn]

Put me down for valve check #2.

Thanks Brian

Gordon, want to verify that you are not able to make it.

 

[Makuna]

In.

No specific work needed at the moment, but always enjoy watching and helping.

 

[lonewolff]

I would like to come and hang out, meet people, watch / learn how to work on the bike more. I don't think I will be riding down but if it's a nice enough day I would for sure. October can be a crap shoot for weather.

Scott

 

[SeattleTy]

If possible, I like to do a brake fluid flush and possibly a tire change, thank you and appreciated!

 

[Auburn]

1346360526[/url]' post='995842']I would like to come and hang out, meet people, watch / learn how to work on the bike more. I don't think I will be riding down but if it's a nice enough day I would for sure. October can be a crap shoot for weather.

Scott

List is updated in the first post. Will be good to see you there.

1346998710[/url]' post='997970']If possible, I like to do a brake fluid flush and possibly a tire change, thank you and appreciated!

Got you added. Make sure to bring brake fluid and something to catch it in.

 

[Beamer Reamer]

Put me down for the following;

- Rotate the air in my tires

- Pack muffler bearings

- Try and find the elusive sprockets and inspect, oil chain

- Try to solve missing clutch lever mystery

- Polish the ground plane

- Drink Tequila

 

[Panman]

Do we have a count on valve checks and Ct changes?

 

[Auburn]

Do we have a count on valve checks and Ct changes?

two at this time. Got Rick done today at his house. He had the infamous ticker develop. He didn't want to risk waiting.

 

[Auburn]

Put me down for valve check #2.

Turns out I can't make it this time. Looks like I'll have to wait till Spring.

Thanks Brian

Gordon, we can arrange to do your valve check at another timewhen you are around.

 

[ahchiu]

Put me down for the following;

- Rotate the air in my tires

- Pack muffler bearings

- Try and find the elusive sprockets and inspect, oil chain

- Try to solve missing clutch lever mystery

- Polish the ground plane

- Drink Tequila

Rotate air? you just put new air in last weekend..