Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
FJR Motorcycle Forums
Technical & Mechanical Problems
Flashing ABS Light
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Yamaha FJR Motorcycle Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="RossKean" data-source="post: 1446430" data-attributes="member: 19880"><p>Look at the parts fiche.</p><p>[URL unfurl="true"]https://www.partzilla.com/catalog/yamaha/motorcycle/2011/fjr1300a-fjr13aas/shift-shaft[/URL]</p><p>Button head Allen bolt #19. You don't really have to take that apart. Spritz with some carb cleaner or even mineral spirits on a rag to clean and work some grease in after you are rid of the solvent. Don't overtighten the bolt #28 - if the wave washer is squished flat, you might find the linkage doesn't ratchet back into position after a shift. Just tight enough and use some blue Loctite on the threads. </p><p>It is a bit of a pain to get the linkage off but not too difficult - be careful with the sidestand - it will be hanging by the wire that goes to the interlock switch - I have never bothered disconnecting it but I am careful to avoid undue stress. One bolt needs a fairly large Torx driver - I forget the size...</p></blockquote><p></p>
[QUOTE="RossKean, post: 1446430, member: 19880"] Look at the parts fiche. [URL unfurl="true"]https://www.partzilla.com/catalog/yamaha/motorcycle/2011/fjr1300a-fjr13aas/shift-shaft[/URL] Button head Allen bolt #19. You don't really have to take that apart. Spritz with some carb cleaner or even mineral spirits on a rag to clean and work some grease in after you are rid of the solvent. Don't overtighten the bolt #28 - if the wave washer is squished flat, you might find the linkage doesn't ratchet back into position after a shift. Just tight enough and use some blue Loctite on the threads. It is a bit of a pain to get the linkage off but not too difficult - be careful with the sidestand - it will be hanging by the wire that goes to the interlock switch - I have never bothered disconnecting it but I am careful to avoid undue stress. One bolt needs a fairly large Torx driver - I forget the size... [/QUOTE]
Insert quotes…
Verification
Post reply
FJR Motorcycle Forums
Technical & Mechanical Problems
Flashing ABS Light
Top
