G-2 floor rolls for garage

[lnewlf]

anyone have this on their garage floor? My floor is solid but has several cracks that reoccur and I'd like to cover the floor with something decent looking and waterproof...plastic tiles are a little rich for my blood..altho this stuff ain't cheap either- run me @ $1400.

https://www.garageflooringllc.com/blt-garage-floor-mat/

 

[majicmaker]

I have two rolls of the ribbed pattern one on my floor. Love it. Each roll was 10 feet wide by 20 feet long. It wasn't cheap but nowhere near $1,400. How big is your garage?

 

[Viper Pilot]

I have had that on my garage floor for about 4 years now. It's 'ok'. Since it is vinyl it has a tendency to form areas that look like large pockets of air underneath. What is actually happening is the material is stretching under your car tires when you turn the wheels while parking. It also stretches under the kickstand of your motorcycle and therefore I use a small block of wood or pad under the kick stand. Overall , except for that 'stretching problem' it has held up well and looks pretty good. I have the diamond pattern. Btw, I believe I bought two 10' X 20' rolls for about $600. if my memory serves me right.

 

[lnewlf]

I need about 750 sq ft.....meebee if you drive in straight without turning the wheels it won't stretch..I'm looking at the thicker commercial grade roll..I think it's 75 mil.

 

[Viper Pilot]

It is the commercial grade thickness that I have. Don't get me wrong, I do like it but it will stretch as I indicated. Overall it's quite an improvement to damaged cement garage floors. And it's super easy to keep clean even in the winter mos. with all the salt and grime that car tires bring into the garage.

 

[FJR-Pilot]

I have two rolls of the ribbed pattern one on my floor. Love it. Each roll was 10 feet wide by 20 feet long. It wasn't cheap but nowhere near $1,400. How big is your garage?

Ditto. I only paid $200 per roll for each 10' x 22' black ribbed at www.walmart.com ($400 for 2 rolls). Just took a look and it seems that product has gone waaaaaay up since I purchased it last year. It's now $330 to $550 per roll depending on where you order it

 

[Pterodactyl]

In my opinion it is not the best choice for areas where vehicles will be parked. Even a bike on a side or center stand will be pretty rough on the vinyl. It's okay in work areas where you walk or even roll a bike.

 

[majicmaker]

I have two rolls of the ribbed pattern one on my floor. Love it. Each roll was 10 feet wide by 20 feet long. It wasn't cheap but nowhere near $1,400. How big is your garage?

Ditto. I only paid $200 per roll for each 10' x 22' black ribbed at www.walmart.com ($400 for 2 rolls). Just took a look and it seems that product has gone waaaaaay up since I purchased it last year. It's now $330 to $550 per roll depending on where you order it :weirdsmiley:

That sounds about right, Pilot. My two rolls costs about $400 and change. I've had it for about 10 years now and it's still doing a good job. I have a few minor stretch marks myself. They don't bother me and Viper is right, it cleans up easily and it shines like new.

 

[FJR-Pilot]

In my opinion it is not the best choice for areas where vehicles will be parked. Even a bike on a side or center stand will be pretty rough on the vinyl. It's okay in work areas where you walk or even roll a bike.

True. Side stands and center stands will mark in the vinyl so I use a small piece of 2x4 for the DRZ side stand and a small piece of (very thin) plywood for the FJR center stand. It holds up pretty well to everything else. The midnight black I installed looks very nice but you have to clean it frequently!

 

[majicmaker]

Mine is a reddish brick color. It hides a lot of dirt for a longer period of time. I use pieces of 1/4 inch thick rubber pads for the center and side stands. Hasn't left a mark yet.

 

[eflyguy]

Costco sells a similar product for less..

 

[eflyguy]

https://www.costco.com/NewAge-8'x20'-Versaroll-Garage-Flooring.product.100300491.html

I think I've seen it in store for $179.

 

[Knifemaker]

I've seen the matts, but don't really care for them. I plan to use the expoxy coating you spray/roll on. A freind has had it on his floor for a few years and it still looks good.