The image is that of the connector that goes from a front turn signal/marker light on the 04-forward Gen 1 FJR. In 03 the indicators were on stalks. After that they were integrated into the fairing.
There's a small section that goes from the connector on the lamp module to the connector on the wiring harness. This is the female connector that plugs into the male mate on the wiring harness.
I need 2 of the male connectors (with as much wire from the harness as possible) so I can splice in the new lights.
If you have, or know where I can get 2 of the male mates to these connectors, PLEASE let me know.
There's a small section that goes from the connector on the lamp module to the connector on the wiring harness. This is the female connector that plugs into the male mate on the wiring harness.
I need 2 of the male connectors (with as much wire from the harness as possible) so I can splice in the new lights.
If you have, or know where I can get 2 of the male mates to these connectors, PLEASE let me know.
Last edited by a moderator: