Parts For Sale Gen 1 Bags, Seats, lots more. Lehigh Valley, PA

[SCB]

Lots of parts from my drowned '05 that I've been meaning to get on here. Again, pics by request by text unless I figure out how to post them. Shipping extra. I am completely out of touch with what stuff is going for. I'll list a price but if I'm off base let me know and make an offer. Mostly just like to see somebody get some use out of this stuff.

Right side case, good condition, $100
Left side case, good condition EXCEPT lock plate is cracked and reflector fell off. I may still have reflector around here. $50

PRICE DROP - just noticed some new marks in the paint. Must’ve happened moving them around for blastoff. So now FREE!! Must pick up.

Back case, very good condition, with mounting plate and hardware. $150

If somebody wants the whole set of bags I'll leave the locks in. If you don't need the locks let me know and I'll list them separately so somebody can get a matched set.

Garauld's rear subframe support, $30

SOLD Garauld's highway peg mounts. Bolts, spacers, plates, no pegs. $30

OEM front seat, very good condition, $75

OEM rear seat, very good condition, $75

SOLD Bar risers, 1", a bit rough but completely functional. Bolts look corroded but they’re not, they’re stainless steel, just had the stock bolts in the bag with them $20

Windshield, (Rifle?) OK condition, 21" tall, center to top, by 24" wide. $50

Corbin Canyon seat (1 piece, front and rear combined) w/ integrated removable backrest, very good condition. $150

OEM bar ends, buy something else and I'll throw them in.

Pick up greatly preferred! Might even give you a discount!

 

[RossKean]

Some good deals...
You can simply copy your jpg photo and paste it into your post. Adjust size as needed. Couldn't be easier.
(Doesn't have to be hosted elsewhere on the net)

 

[SCB]

Thanks for the tip! Added pics to gen 2 post. Not sure how to adjust size…

 

[Renzo]

Lots of parts from my drowned '05 that I've been meaning to get on here. Again, pics by request by text unless I figure out how to post them. Shipping extra. I am completely out of touch with what stuff is going for. I'll list a price but if I'm off base let me know and make an offer. Mostly just like to see somebody get some use out of this stuff.

Right side case, good condition, $100
Left side case, good condition EXCEPT lock plate is cracked and reflector fell off. I may still have reflector around here. $50

PRICE DROP - just noticed some new marks in the paint. Must’ve happened moving them around for blastoff. So now FREE!! Must pick up.

Back case, very good condition, with mounting plate and hardware. $150

If somebody wants the whole set of bags I'll leave the locks in. If you don't need the locks let me know and I'll list them separately so somebody can get a matched set.

Garauld's rear subframe support, $30

Garauld's highway peg mounts. Bolts, spacers, plates, no pegs. $30

OEM front seat, very good condition, $75

OEM rear seat, very good condition, $75

Bar risers, 1", a bit rough but completely functional. Bolts look corroded but they’re not, they’re stainless steel, just had the stock bolts in the bag with them $20

Windshield, (Rifle?) OK condition, 21" tall, center to top, by 24" wide. $50

Corbin Canyon seat (1 piece, front and rear combined) w/ integrated removable backrest, very good condition. $150

OEM bar ends, buy something else and I'll throw them in.

Pick up greatly preferred! Might even give you a discount!

PM sent on Bar risers.

 

[RTSinDallass]

PM sent for the Corbin

 

[bonami00]

i want the shoes, they look super comfortable

 

[Renzo]

PM sent on Bar risers.

Also the highway peg mount.

 

[SCB]

i want the shoes, they look super comfortable
View attachment 8480

Everything's available for the right price!

 

[SCB]

PM sent for the Corbin

Replied

 

[SCB]

Also the highway peg mount.

Yep, I included them in the box with the risers

 

[Renzo]

Yep, I included them in the box with the risers

OK, thanks. I only do PayPal a lot but my Son Jeremy in Phoenix does Vinmo. The parts are all going to him anyway. He wants to pay you and talk to you about the saddle bags as well. His phone # is
480-408-7002. Send me your number in case something gets screwed up. He is expecting your call for your payment information. Thanks again, Renzo

 

[SCB]

Will do!

 

[dgaige]

Lots of parts from my drowned '05 that I've been meaning to get on here. Again, pics by request by text unless I figure out how to post them. Shipping extra. I am completely out of touch with what stuff is going for. I'll list a price but if I'm off base let me know and make an offer. Mostly just like to see somebody get some use out of this stuff.

Right side case, good condition, $100
Left side case, good condition EXCEPT lock plate is cracked and reflector fell off. I may still have reflector around here. $50

PRICE DROP - just noticed some new marks in the paint. Must’ve happened moving them around for blastoff. So now FREE!! Must pick up.

Back case, very good condition, with mounting plate and hardware. $150

If somebody wants the whole set of bags I'll leave the locks in. If you don't need the locks let me know and I'll list them separately so somebody can get a matched set.

Garauld's rear subframe support, $30

SOLD Garauld's highway peg mounts. Bolts, spacers, plates, no pegs. $30

OEM front seat, very good condition, $75

OEM rear seat, very good condition, $75

SOLD Bar risers, 1", a bit rough but completely functional. Bolts look corroded but they’re not, they’re stainless steel, just had the stock bolts in the bag with them $20

Windshield, (Rifle?) OK condition, 21" tall, center to top, by 24" wide. $50

Corbin Canyon seat (1 piece, front and rear combined) w/ integrated removable backrest, very good condition. $150

OEM bar ends, buy something else and I'll throw them in.

Pick up greatly preferred! Might even give you a discount!

I need the bar ends if you still have them.

 

[SCB]

I need the bar ends if you still have them.

Need anything else?

 

[Jeff Gordon]

Corbin seat available?

 

[SCB]

Corbin seat available?

As of right now, yes. I sent a shipping quote (~$100) to RTS but haven’t heard back yet. Let’s give him a day to decide.

 

[Rusty3]

Lots of parts from my drowned '05 that I've been meaning to get on here. Again, pics by request by text unless I figure out how to post them. Shipping extra. I am completely out of touch with what stuff is going for. I'll list a price but if I'm off base let me know and make an offer. Mostly just like to see somebody get some use out of this stuff.

Right side case, good condition, $100
Left side case, good condition EXCEPT lock plate is cracked and reflector fell off. I may still have reflector around here. $50

PRICE DROP - just noticed some new marks in the paint. Must’ve happened moving them around for blastoff. So now FREE!! Must pick up.

Back case, very good condition, with mounting plate and hardware. $150

If somebody wants the whole set of bags I'll leave the locks in. If you don't need the locks let me know and I'll list them separately so somebody can get a matched set.

Garauld's rear subframe support, $30

SOLD Garauld's highway peg mounts. Bolts, spacers, plates, no pegs. $30

OEM front seat, very good condition, $75

OEM rear seat, very good condition, $75

SOLD Bar risers, 1", a bit rough but completely functional. Bolts look corroded but they’re not, they’re stainless steel, just had the stock bolts in the bag with them $20

Windshield, (Rifle?) OK condition, 21" tall, center to top, by 24" wide. $50

Corbin Canyon seat (1 piece, front and rear combined) w/ integrated removable backrest, very good condition. $150

OEM bar ends, buy something else and I'll throw them in.

Pick up greatly preferred! Might even give you a discount!

I’m in Northern Cal., but I’d like that right side case. I’m at work and will PM you once I’m home.

 

[Rusty3]

I’m in Northern Cal., but I’d like that right side case. I’m at work and will PM you once I’m home.

PM sent