Heli Group Buy..... (ends 11/15/2008)

[thlh2007]

anybody do it w/o taking the tank off?

No, we took our tank off. It took us less than 2 hours to install it though.

 

[Fz1Pilot]

Mine was delivered today, Thanks again Chris_D! Hopefully I'll get it installed this week and tested this weekend. Woo Hoo!

 

[Pauls927]

Ordered mine today. Should ship out this afternoon.

Thanks Chris.

 

[Joe]

Mine was delivered late yesterday.

Now I only need time to inatall it.

Thanks again Chris.

Joe

 

[johnny80s]

Got mine installed over the weekend and it is great. The numb right hand I had is gone. Can't say enough good things about this product.

 

[Big Daddy]

im in the middle of installing, not enough time in the day, i raised the tank slightly, do not think it needs to come off totally......am i right? the only thing you need is access to the plugs for the IGN ?

 

[johnny80s]

im in the middle of installing, not enough time in the day, i raised the tank slightly, do not think it needs to come off totally......am i right? the only thing you need is access to the plugs for the IGN ?

Just raise it up and then you can get to the plugs. They are on the left side if you are sitting on the bike. The hardest part is drilling the original bolts. Punch them square in the middle then make sure you have the three correct drill bits. Also make sure the bits are sharp.

 

[Big Daddy]

thanks Johnny, oh and dont worry about having the right bit. My only problem is which type.....could never pass up a sale on new bits ;-)

 

[CHRIS_D]

What ever you do don't break a drill bit off in that bolt. Don't ask me how I know this

 

[Big Daddy]

the ZEN of drilling.....paitance young grasshopper

 

[Big Daddy]

im in the middle of installing, not enough time in the day, i raised the tank slightly, do not think it needs to come off totally......am i right? the only thing you need is access to the plugs for the IGN ?

Just raise it up and then you can get to the plugs. They are on the left side if you are sitting on the bike. The hardest part is drilling the original bolts. Punch them square in the middle then make sure you have the three correct drill bits. Also make sure the bits are sharp.

Thanks Johnny :angry2: (J/K) im looking and looking & saying WTF no wires on the left side. Not your fault,you where just upping my skills. Mine where on the right side of the tank. anyway mine are on, i havent put the seat on yet cause i have a few things under there to play with. :assassin: Did anyone notice that on turning fully right axis the cluch hose is tight?

and does anyone know the threads of the 2 ram mount holes?

Oh and i measured befor and after on the centerstand. It seems i only gained 1/2" up on the bars, but the important part is 1" back. :yahoo: my short arms are happy.

Thanks Bob

 

[fjrshanta]

CHRIS D.

I cant thank you enough for this group buy! I was too late on the last one but now, I have the Heli installed and absolutely love it! For me it is the most comfortable farkle so far!! :bike: :clapping: :bike: :bike: :bike: :bike:

 

[YooperDick]

Color me ordered.

 

[johnny80s]

im in the middle of installing, not enough time in the day, i raised the tank slightly, do not think it needs to come off totally......am i right? the only thing you need is access to the plugs for the IGN ?

Just raise it up and then you can get to the plugs. They are on the left side if you are sitting on the bike. The hardest part is drilling the original bolts. Punch them square in the middle then make sure you have the three correct drill bits. Also make sure the bits are sharp.

Thanks Johnny :angry2: (J/K) im looking and looking & saying WTF no wires on the left side. Not your fault,you where just upping my skills. Mine where on the right side of the tank. anyway mine are on, i havent put the seat on yet cause i have a few things under there to play with. :assassin: Did anyone notice that on turning fully right axis the cluch hose is tight?

and does anyone know the threads of the 2 ram mount holes?

Oh and i measured befor and after on the centerstand. It seems i only gained 1/2" up on the bars, but the important part is 1" back. :yahoo: my short arms are happy.

Thanks Bob

I meant my other left.

 

[txfjr05rider]

I placed my order today for the hrt076-2 for my 07,Thanks!

 

[CHRIS_D]

Folks,

Anyone else who's interested needs to get their order in by FRIDAY the 14th.

 

[crankshaft]

I'd love to order one of these. It'd definately help on the reach. But with the way things are right now, I just can't afford it. It's definately on my wish list. You ran group buy back in June or so and it ended right when I bought the bike so I hadn't had a chance to test the bike out to see if I needed something like this. After riding a while I decided I'd get one with the next group buy. Unfortunately, timing and lack of funds just isn't going to allow me to do it this time. Hopefully you'll run one again in the spring and I'll pick one up then. Everyone appreciates that fact that you set these up.

Even though I'm not able to take advantage of this great deal THANK YOU!!!

 

[Motorcycledoc]

I ordered the Triple Clamp Riser this morning.

Many thanks for putting this together!

 

[beacher]

Slid in under the wire, this morning! Thanks for making this possible!

 

[gprmiker]

Slid in under the wire, this morning! Thanks for making this possible!

Installed mine on fri. worth every penny.