I need some Expertise...

[buckster]

Hey guys, I know someone out there knows the answer, I am mounting a CCS100 cruise control and want only the single rocker switch on the left handgrip. Looking at the left handgrip assembly it has a cut out on the back left side of the switch assembly. It currently has a block off installed. Does anyone know what this cut out is for and does anyone know of a rocker switch that will fit . It should be a monentary rocker on-off-on, it's the size and mount I'm trying to find. This would be a great location for the rocker switch and I intend to find a switch that'll snap right in. I'm an electronics type so connection is no big issue it's finding a switch having only catalogs to try determining fit. It sure would be a nice spot.

 

[Bearly Flying]

That is used on European spec bike for a "Flash to Pass" switch, flips Hi Beam on momentarily.

A few guy's have used that for their CC100 switch.

Good Luck with your install. Well worth the effort.

 

[TheAxeman]

HERE is a link to another rocker switch install. I'm not sure if it will help but the pictures are nice.

 

[v65]

Check out BrunDog's install, he has some ideas for switches for you. The parts numbers on the switches have changed: the momentary is 360-2064-ND and the on/off switch is 360-1798-ND, and the covers are 360-1750-ND well at least they were a year ago.

The folks at Digi-Key are real helpful if the numbers have changed again. BTW, the numbers have changed because the new switches are more environmental friendly. That BrunDog is bad for the environment.

 

[slapnpop]

Side note, there may be no physical or material difference to the switch, only that it's "certified" more environmentally friendly.

Key word is *may*

 

[Brodie]

Buckster,

I too am eyeing that switch, although for a different application. My previous bike, a Yamaha Venture Royale, had a momentary on switch in that same location. It was for the PTT circuit on the factory CB radio. I plan to obtain a switch from a euro spec. FJR wreck (E-Bay) and work it into my soon to be Starcom Digital farkle. It sure would be nice if someone on the far side of the pond had a lead on obtaining these switches.

Brodie

 

[dcarver]

Then there is this option..

 

[v65]

Buckster,
I too am eyeing that switch, although for a different application. My previous bike, a Yamaha Venture Royale, had a momentary on switch in that same location. It was for the PTT circuit on the factory CB radio. I plan to obtain a switch from a euro spec. FJR wreck (E-Bay) and work it into my soon to be Starcom Digital farkle. It sure would be nice if someone on the far side of the pond had a lead on obtaining these switches.

Brodie

Let us know if that works out. I tried something similar a year ago with zero success. The people I talked to with wrecked bikes were not that interested in selling anything that small, I guess it's not worth their time. I also tried buying new from a shop in the UK by e-mail. In response I get their spam, but no parts. :glare:

 

[BrunDog]

Shhhhh!!! Al Gore is hot on my trail!!

Man, I knew those switches would get the EPA's attention...

-BD