Motorcycle Larry Drill Fixture

[well]

Does anyone have or have access to a MCL Drill Fixture? I unfortunately left my MCL riser on my 2012 when I sold it. Now have a 2015 and purchased a used riser. Need to get the bolts out of the ignition. Willing to rent or possibly purchase.

Thanks,

Larry

 

[rbentnail]

You really don't need a fixture. Start with a small bit then go progressively bigger until the head pops off.

But I thought the riser doesn't fit the Gen3 and that's why people went to using the add-on bridge.

 

[escapefjrtist]

Center punch the security bolts first, then follow ^^^^ 'nails advice. Works every time.

rbentnail: But I thought the riser doesn't fit the Gen3 and that's why people went to using the add-on bridge.

Replacement Heli and MCL triple clamps work fine on the A models. I've moved the same Heli from my '06 to '09 and now '15A. It's the USD forks that require the specific MCL triple clamp [no longer available?] or the add-on riser.

~G

 

[VMaxChuck]

Some good advice here.......that's how I put a used MCL triple clamp on my '16. Works better and looks way better than the Heli plate (what I had on my '13)