Need risers

[BluStrk]

Anyone have a set if risers for a GEN 1 lying around gathering dust? I would prefer GenMar but will entertain others...thanks.

 

[dbx]

Anyone have a set if risers for a GEN 1 lying around gathering dust? I would prefer GenMar but will entertain others...thanks.

Dang it, I only have a pair of Heli risers for Gen 1....

 

[James]

Anyone have a set if risers for a GEN 1 lying around gathering dust? I would prefer GenMar but will entertain others...thanks.

I have a set of Heli's, up 3/4", back 3/4". $45 to your door (U.S.).

 

[BluStrk]

Anyone have a set if risers for a GEN 1 lying around gathering dust? I would prefer GenMar but will entertain others...thanks.

I have a set of Heli's, up 3/4", back 3/4". $45 to your door (U.S.).

Let me research the Heli's. 3/4 might not be enough... I'll get back to you. Thanks.

Anyone have a set if risers for a GEN 1 lying around gathering dust? I would prefer GenMar but will entertain others...thanks.

Dang it, I only have a pair of Heli risers for Gen 1....

Let me research the Heli's. 3/4 might not be enough... I'll get back to you. Thanks. Cost?

 

[dbx]

Dang it, I only have a pair of Heli risers for Gen 1....

Let me research the Heli's. 3/4 might not be enough... I'll get back to you. Thanks. Cost?

Here's what it says on the Heli website about the amount of rise:

HeliBars® Tour Performance® Yamaha FJR1300 Handlebar Riser Adapters by HeliBars install beneath your stock bars and raise them 1" (25mm.) By offsetting the bar remount location back, out and rotating the bolt pattern, the hand grips are repositioned 1 3/4" closer to the rider. All stock cables and hydraulic lines are retained. Includes all hardware necessary for installation.

That 1 3/4" rise may not sound like much, but it made a big difference for me. I'll match the $45 delivered.

 

[DELETE-PLEASE]

Alright. OP was looking for risers. Two sets available for 45. Whichever he/she doesn't take, I'll take. I've already contacted DBX. So hopefully there's some time limit for the OP to respond that they want them. I'll take whichever. Same product, same price. SO I'm good with either.

Alexi

 

[BluStrk]

Dang it, I only have a pair of Heli risers for Gen 1....

Let me research the Heli's. 3/4 might not be enough... I'll get back to you. Thanks. Cost?

Here's what it says on the Heli website about the amount of rise:

HeliBars® Tour Performance® Yamaha FJR1300 Handlebar Riser Adapters by HeliBars install beneath your stock bars and raise them 1" (25mm.) By offsetting the bar remount location back, out and rotating the bolt pattern, the hand grips are repositioned 1 3/4" closer to the rider. All stock cables and hydraulic lines are retained. Includes all hardware necessary for installation.

That 1 3/4" rise may not sound like much, but it made a big difference for me. I'll match the $45 delivered.

Ok, thanks for the info. Since you were first to reply I'll take yours and Alexi can have the other set. PM me with your addy and I'll get a check or MO out to you.

Alright. OP was looking for risers. Two sets available for 45. Whichever he/she doesn't take, I'll take. I've already contacted DBX. So hopefully there's some time limit for the OP to respond that they want them. I'll take whichever. Same product, same price. SO I'm good with either.
Alexi

Alexi, I took the set from DBX, contact James for his set...

 

[BluStrk]

Anyone have a set if risers for a GEN 1 lying around gathering dust? I would prefer GenMar but will entertain others...thanks.

I have a set of Heli's, up 3/4", back 3/4". $45 to your door (U.S.).

James, since DBX replied first, I took his. Alexi may contact you for your set....thanks.

 

[dbx]

Anyone have a set if risers for a GEN 1 lying around gathering dust? I would prefer GenMar but will entertain others...thanks.

I have a set of Heli's, up 3/4", back 3/4". $45 to your door (U.S.).

James, since DBX replied first, I took his. Alexi may contact you for your set....thanks.

I hope I didn't just promise my risers to both of you. I answered a bunch of PM's without thinking. We'll figure it out, I'm sure.

 

[James]

I hope I didn't just promise my risers to both of you. I answered a bunch of PM's without thinking. We'll figure it out, I'm sure.

If mine are wanted, just send me a PM. Otherwise they stay in the garage on the tool box .

 

[dbx]

I hope I didn't just promise my risers to both of you. I answered a bunch of PM's without thinking. We'll figure it out, I'm sure.

If mine are wanted, just send me a PM. Otherwise they stay in the garage on the tool box .

After the latest round of PMs, here's what I know. Someone post up if this is wrong.

Alexi will buy the set from James.

BluStrk will buy the set from me.

For the record, my Heli risers are missing some of the shiny bolt caps. I think I have 2 per side and there should actually be 5 per side. While that never bothered me in the slightest, (I expect a bolt to look like a bolt, not a shiny rivet), if it bothers my buyer then it's an issue. I just wanted to put that out there so there are no surprises.

Both James and I are selling for $45, and I assume his are perfect. Used, but otherwise perfect. Sound good?

 

[DELETE-PLEASE]

After the latest round of PMs, here's what I know. Someone post up if this is wrong.
Alexi will buy the set from James.

BluStrk will buy the set from me.

For the record, my Heli risers are missing some of the shiny bolt caps. I think I have 2 per side and there should actually be 5 per side. While that never bothered me in the slightest, (I expect a bolt to look like a bolt, not a shiny rivet), if it bothers my buyer then it's an issue. I just wanted to put that out there so there are no surprises.

Both James and I are selling for $45, and I assume his are perfect. Used, but otherwise perfect. Sound good?

Yup. Sounds good. I've PMed James on his set. I'm glad this popped man. My collection of parts to be installed is growing......

Alexi

 

[BluStrk]

I hope I didn't just promise my risers to both of you. I answered a bunch of PM's without thinking. We'll figure it out, I'm sure.

If mine are wanted, just send me a PM. Otherwise they stay in the garage on the tool box .

After the latest round of PMs, here's what I know. Someone post up if this is wrong.

Alexi will buy the set from James.

BluStrk will buy the set from me.

For the record, my Heli risers are missing some of the shiny bolt caps. I think I have 2 per side and there should actually be 5 per side. While that never bothered me in the slightest, (I expect a bolt to look like a bolt, not a shiny rivet), if it bothers my buyer then it's an issue. I just wanted to put that out there so there are no surprises.

Both James and I are selling for $45, and I assume his are perfect. Used, but otherwise perfect. Sound good?

I put the MO in the mail to you today...I'll take care of the shiny parts...