Poor OEM Tire Miles -- Only 500 Miles!

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Lauren_TK

Well-known member
Joined
Sep 17, 2013
Messages
334
Reaction score
52
Location
Marysville, WA
That's right! I only got about 500 miles on my OEM tire before it had to be replaced.

To be fair, it wasn't really the tire's fault. It was probably the 3 inch, flat-head, Phillips, wood screw's fault.

But couldn't the screw have waited until 600 for the proper break-in service?

 
Bummer. Hope you didn't get stranded.

I picked up a machine screw in the new (<1k miles) rear tire of my Wingabago. Plugged it, and off I went.

 
Last edited by a moderator:
Same thing happened to me on my 08. Look on the bright side: you're that much closer to trying the PR3 and ditching the crap OEM.

 
Bummer, seems new tires have an affinity for picking up foreign objects...

Replace with a quality alternative and you'll be happy ever after!

--G

 
Bummer. Hope you didn't get stranded.
No, I wasn't stranded--thank goodness.

1. I keep a plug kit on the bike.

2. I was about 500 yards from home, so I was able to have dinner, a drink, and worry about putting in the plug tomorrow morning.

Now that the bike is on the center stand and the screw doesn't have any pressure on it, there doesn't seem to be any more leaking.

 
Carry it on your bike.

https://www.amazon.com/Slime-40001-Motorcycle-Tire-Inflator/dp/B000ET9SB4/ref=sr_1_3?ie=UTF8&qid=1387001328&sr=8-3&keywords=slime+air+compressor

71vINq6-SbL._SL1500_.jpg


 
You need to carry a small compressor (and sticky strings) on the bike because the next flat won't happen at the end of your driveway.

Got mine at the local NAPA for under 15 bucks. I use a 2 prong plug that goes on the battery tender cord.

 
Last edited by a moderator:
You need to carry a small compressor (and sticky strings) on the bike because the next flat won't happen at the end of your driveway.
Got mine at the local NAPA for under 15 bucks. I use a 2 prong plug that goes on the battery tender cord.
I got the sticky strings, and a portable compressor that plugs into a 12V accessory socket. I just can't find it.

ScrewIn.JPG


ScrewOut.JPG


 
Now that you worm plugged it take it to a tire shop and get it patched from the INSIDE for a more secure repair.

I've had worm plugs work their way out before and I've had friends that have too....can't always trust that glue for a permanent repair.

When they patch it from the inside with heat it's vulcanized with the rubber.

 
There is no denying that an inside plug is the best, particularly the type with a 'stinger' that goes through the penetration. That being said, the only plug I've ever had work loose was of the solid rubber variety. American made sticky strings have never failed me, and I've used 7 or 8 in the last three decades, often for the entire life (6K plus) of tread life. The problem, of course, is that American made strings are hard to find, with only Chinese crap (short for commercially reprehensible asian products) commonly available.

 
I put a sticky string in the center of my Michelin Pilot Exalto... 30k miles ago. It's still going strong with no leakage on my bike. Yeah, they do leak sometimes, but not very often.

 
You need to carry a small compressor (and sticky strings) on the bike because the next flat won't happen at the end of your driveway.
Got mine at the local NAPA for under 15 bucks. I use a 2 prong plug that goes on the battery tender cord.
I got the sticky strings, and a portable compressor that plugs into a 12V accessory socket. I just can't find it.

ScrewIn.JPG


ScrewOut.JPG
It should be on your bike at all times.
smile.png


 
WHOLE leash IT! That's a SCREW.

Last time I saw a screw that size in a tire, it was in a friend's bicycle tire. It went all the way through the tire, the tube AND the RIM.

Have fun hunting for the compressor. The Slime works well, if a bit slowly.

 
Last edited by a moderator:
The slime works great. Ask me how I know.
smile.png


Use some rubber cement on the wormy string plugs. Apply the rubber cement after you have the string hooked through the tool. Ask me how I know. :)

 
Last edited by a moderator:
Top