Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="clock655" data-source="post: 738928" data-attributes="member: 5063"><p>I guess no takers for my question about the possibly required 1.0mm bleed hole...  Regardless, I came to the conclusion that since the valve is preassembled, that additional drilling wasn't necessary.  If anybody knows or finds out differently, please let me know...  I've completely reassembled my forks and reinstalled them on the bike with the RT kit and found the overall process quite painless with thanks mostly to these instructions!  Thanks a lot to Scoobyvroom!</p></blockquote><p></p>