Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="lnewlf" data-source="post: 1201463" data-attributes="member: 9707">just replaced my fork sealz---no need to pull the bushings.....remove cap,spring, dust cover, circlip...extend fork and fill with....[i used kerosene]..replace cap.and find some way to compress the fork....[hydraulic press, bottle jack...anything that works]. seal will pop out far enough to grab it and pry it out...protect the knob on the cap with a socket when compressing. This is especially handy on a Gen II which has a middle bushingcan't speak to the damping adjuster...isn't that for compression damping?</blockquote>