Spieger Banjo Bolts Number

[Woodstock]

I had the spieglers put on at a shop, and I never counted the banjo bolts so I'm not sure how many we were supposed to get for the ABS+clutch kit. I know that they're only for the "visable" sections, but it looks like there are 3 missing from what I can tell.

I think there should be 8.

- 2 normal size for clutch line (1 at each end)

- 3 normal size (1 at each caliper)

- 1 normal size at front lever

- 1 normal size at tripple connect under chin

- 1 double size at tripple connect under chin

I'm not sure about the rear brake pedal/lever?

I think I'm missing 3 of them. The clutch lever and brake lever have been left stock, as well as the rear caliper. There aren't any left over. I checked the modulator and all 4 there are stock as well.

Am I missing anything, or have I counted wrong? (and does anyone know if I can contact Gary/UM or Spielger and order additional?)

 

[Fabone]

I think there should be 8.
- 2 normal size for clutch line (1 at each end)

- 3 normal size (1 at each caliper)

- 1 normal size at front lever

- 1 normal size at tripple connect under chin

- 1 double size at tripple connect under chin

I'm not sure about the rear brake pedal/lever?

The rear brake master and the ABS unit reuse the stock bolts, which would be 5 out of a possible 13 bolts total, that you don't see. Some people also don't do the rear caliper bolt, which would make it 7 bolts, otherwise there should be 8. If you're short, call Spiegler.