I purchased a used replacement stator (2) years ago from Duster19 when my original went out on me. It was about this time of year and Yamaha could not get me a new stator until December and I wanted to get some fall rides in. It has worked well until a few weeks ago. Thanks again Duster!
I'm in the process of installing a new OEM stator and R/R this time. I had spliced into the existing wiring just under the gas tank with the used stator as the connector had been cut off.
Problem: What do I need to do to make room for the R/R connector and wiring to be removed from the bike and placing the new one. There is a long plastic tray between the radiator and the sub-frame that somewhat encases the wires as they round the subframe for attachment to the R/R.
Do I need to loosen up the radiator at the top?
Are there other items that need to be removed?
Thanks for any insight that can be supplied.
I'm in the process of installing a new OEM stator and R/R this time. I had spliced into the existing wiring just under the gas tank with the used stator as the connector had been cut off.
Problem: What do I need to do to make room for the R/R connector and wiring to be removed from the bike and placing the new one. There is a long plastic tray between the radiator and the sub-frame that somewhat encases the wires as they round the subframe for attachment to the R/R.
Do I need to loosen up the radiator at the top?
Are there other items that need to be removed?
Thanks for any insight that can be supplied.
Last edited by a moderator:
