Tankslapper Install Question

[benneyb]

I've installed the non-3M version of the Tankslapper on my '05 today, and have a question. Apologies if this was answered in the various threads, but I missed it.

I have a number of little water bubbles that remain after squeeging - will these go away when the water completely dries, or should they be gone pretty much immediately?

Thanks in advance.

 

[SkooterG]

If they are water bubbles only, they will go away. How big are they. For the non-3M material, I was able to work those out with the squeegie most of the time.

If there is any air in them whatsoever, after the water is gone, the air bubble will show very obviously. But you can always re-do it.