Sporall
Member
I’ve had a look around and can’t find anything on this so thought I’d ask if it’s possible to get this changed. There’s nothing in the handbook that I could see.
Thanks.
Thanks.
Gen II bikes cannot change display units from imperial (or US gallons) to metric. Gen I could and so can Gen III+. You would have to replace the instrument cluster.I’ve had a look around and can’t find anything on this so thought I’d ask if it’s possible to get this changed. There’s nothing in the handbook that I could see.
Thanks.
Thanks, at least I can stop looking nowGen II bikes cannot change display units from imperial (or US gallons) to metric. Gen I could and so can Gen III+. You would have to replace the instrument cluster.
What year is your bike?I’ve had a look around and can’t find anything on this so thought I’d ask if it’s possible to get this changed. There’s nothing in the handbook that I could see.
Thanks.
It's a 2008. I just ran a check on it and it's come back as not imported or exported. Odometer is in miles, speedo is in miles and there's no MOT reports for non-compliant lighting etc. I've messaged the dealer asking the question and to ask if they can change it with dealer only tools. It's a relatively un-important detail but I'm a bit miffed that this wasn't pointed out by the dealer, at least it would have prompted questions about the bike's origins. Maybe it's a parallel import from Europe or something and isn't recorded in the same way as if it had come from America?What year is your bike?
Gen2 UK spec bikes are set to degrees C and MPG (imperial gallons), no way of changing them. If yours is a Gen2 and is reading degrees F, it's not a UK bike.
That's interesting regarding fuel consumption. I had my first ride on it today and after around 80 miles the average consumption was around 37.5mpgIf it had come from Europe I would expect the temp to be in Centigrade and speed in KM.
My 2009 was imported from America and it has temp in Fahrenheit, but speed in Miles. MPG also uses US gallons which are smaller than imperial gallons, so my fuel consumption appears quite bad.
If it was imported by a dealer then any headlight adjustment should also have been done so it shouldn't show up on MOTs.
Is there anything else unique to your bike such as emissions equipment that wouldn't normally appear on a UK bike?If it had come from Europe I would expect the temp to be in Centigrade and speed in KM.
My 2009 was imported from America and it has temp in Fahrenheit, but speed in Miles. MPG also uses US gallons which are smaller than imperial gallons, so my fuel consumption appears quite bad.
If it was imported by a dealer then any headlight adjustment should also have been done so it shouldn't show up on MOTs.
I think fuel consumption APPEARS bad because the fuel consumption meter is in miles per US gallon rather than miles per Imperial gallon.Is there anything else unique to your bike such as emissions equipment that wouldn't normally appear on a UK bike?
That's interesting regarding fuel consumption. I had my first ride on it today and after around 80 miles the average consumption was around 37.5mpg
I'm going to give the supplying dealer a call tomorrow and/or Yamaha UK. Although the check came back as negative there's clearly something unknown here.
Correct in every detail, though I don't know whether non-UK bikes have mpg numbers on their speedometers. I would expect them to because we see riders from the continent in the UK. But then you must get Canadian riders in the US, so who knows?I think fuel consumption APPEARS bad because the fuel consumption meter is in miles per US gallon rather than miles per Imperial gallon.
IIRC, a UK bike normally uses degrees C, miles and Imperial gallons???
US uses degrees F, miles and US gallons.
The rest of the world bikes use degrees C, kilometers and litres.
This is, of course, for Gen II where the owner cannot choose display units.
Note: rest-of-the-world bikes can switch between litres/100 km and km/litre for consumption.
US (and UK) bikes have a speedometer display that includes both miles and kilometers (in smaller print) on the dial.
At least in Canada (and probably elsewhere), the dial is printed only in kilometers.
Interesting observation... A US bike doesn't hide its metric roots. A rest-of-the world bike updates the average fuel consumption exactly once per kilometer after it has been reset. A US bike updates every 0.621 miles (= 1 km).
Correct in every detail, though I don't know whether non-UK bikes have mpg numbers on their speedometers, but I would expect them to because we see riders from the continent in the UK. Gen3 bikes are switchable, digital readout.
The only other differences which I know about is that my bike came with orange reflectors on the side of the panniers and forks.Is there anything else unique to your bike such as emissions equipment that wouldn't normally appear on a UK bike?
That's almost certainly US spec.The only other differences which I know about is that my bike came with orange reflectors on the side of the panniers and forks.
It also didn't have a factory fitted immobiliser which was standard on a UK Gen II bike so I do not have a 'red' key.
Apart from that everything was the same.
No almost about it, It is definitely a US spec bike, as I bought it new from a company which imported FJRs from the USA.That's almost certainly US spec.
Is that under Vehicle Details, section D.2 ? If it is, there's nothing there on my V5.Also , I've just checked my V5 and there is a note, "SVA/IVA Cert issued 26 02 2009" which is what is issued to prove an imported vehicle meets UK specifications, e.g, lights, etc. So I would expect the same on your V5.
Yes it is in section D.2. first note about first registration and then second note about SVA/IVA,Is that under Vehicle Details, section D.2 ? If it is, there's nothing there on my V5.
Enter your email address to join: