Underseat Storage

[tontofjr]

Somewhere I saw a Farkle for expanding the storage under one of the seats on an FJR to add some extra electronic gubbins

But WHERE

I have searched 3 forums and found zilch

Can someone point me to the right place please :clap: :blink:

 

[dgfella]

Everyone simply removes the tool tray, to gain about 50% more space. I made a simple bracket to secure the ECU (it is normally screwed to the bottom of the tool tray). I also made a 'shelf' to hold my PCIII. There is still plenty of room even after these changes.

 

[BullCBX]

tontofjr,

I believe I found the old thread you are looking for. I'll try pasting the link here. If these don't work send me a PM and I'll forward the information where I found it.

https://www.fjrowners.ws/discus/messages/35...html?1068289314

BULL

 

[yamaholic]

Yep, that link is whip.

I tried something different early on and am still running it:

FJR Owners Archive

Do a search for heat problem..solved. The post is about cutting away plastic under the seat to reduce heat, but it also frees up space. Reduces heat, frees up a ton of storage space, and reduces weight at the same time.

I use a 100oz tide container with the top cutoff. There is enough room for the audiovox cruise unit, air compressor, troublelight, small bag of TP/tums, leatherman, small tools, tire plug kit, and wheel lock.

Check it out...

Perhaps I'll fabricate a box this winter, but I kinda doubt it...

 

[madmike2]

Of course, that won't work on the ABS bikes. That void under the tool tray is where the ABS unit resides.

 

[tontofjr]

Thanks for that folks its what I was looking for :lol:

but of course madmikes post was just what I didnt need as mine is an ABS bike

:dribble: