Waterproof switches for use with cruise

[Barry 07 FJR1300AE]

I installed switches from radio shack but after a couple washes one is stuck on. I need to do it right this time. Anyone know where I can get two waterproof micro switches?

Current setup pic https://i816.photobucket.com/albums/zz81/reedbm/media1.jpg

Sorry using iPhone can't post the pic.

 

[VanHarlan]

West Marine . . . but I don't know if they have anything that small . . . I put a water proof switch inline with my Datel meter install . . .

West Marine **CLICKY**

 

[Good2Go]

I installed switches from radio shack but after a couple washes one is stuck on. I need to do it right this time. Anyone know where I can get two waterproof micro switches?
Current setup pic https://i816.photobucket.com/albums/zz81/reedbm/media1.jpg

Sorry using iPhone can't post the pic.

Uhhhh...just quit washing your bike.

But if you must....Google search brings up this post with part numbers Link.

 

[Roy Epperson]

I installed switches from radio shack but after a couple washes one is stuck on. I need to do it right this time. Anyone know where I can get two waterproof micro switches?
Current setup pic https://i816.photobucket.com/albums/zz81/reedbm/media1.jpg

Sorry using iPhone can't post the pic.

From my search when I purchased some

The switch and rubber boot were ordered from Digi-Key using the following part numbers.
360-1091-ND SPDT Mini Toggle Switch
335-1003-ND Rubber boot, Black
The boot is used to completely weatherproof the switch, and comes in Red if you prefer.


Instead of installing those two switches (recommend a red boot for on/off switch and a black boot for momentary switch which is your set/coast & resume/accel

I got the switches (and other electronics, always) from Digi-Key.

The miniature switches in the housing -
SET/COAST/ACCEL/RESUME switch is 360-1143-ND ($7.50)
and the ON/OFF switch is 360-1140-ND ($6.06):
https://dkc3.digikey.com/PDF/T052/1216.pdf

The boots - Black 335-1003 and red 335-1002 ($4.56 ea):
https://dkc3.digikey.com/PDF/T052/1210.pdf

 

[Woketman]

I used the small toggle with a rubber boot (got it from Digi-Key, I think Patriot gave the numbers in some AVCC thread). It has worked great so far, but the very top of the rubber boot has already worn through. I can see the very top of the toggle's chrome finish. Have not had any issues with moisture yet..... Was a little miffed that the boot was that thin.

 

[Pepperell]

I posted pics of my setup on this post Brundog's Farkles

Part numbers are in there.

 

[Checkswrecks]

You're in KY, so just look in the yellow pages for a marina or boat supply store.

 

[Barry 07 FJR1300AE]

Thanks for the help. I was looking more for push button mom waterproof switches. My current setup is the cruise is always on, one switch to set, one to resume. I saw the post where burndog used a mom off mom rocker toggle in the pass cutout in the switch gear. That would be the berries, but then I will have holes in my dash. Anyway again thanks for the help. As I do live on a huge lake I will take my problem to some marine electronics shops and see what I find. Ill post the pics.

 

[mferriter]

https://dkc1.digikey.com/us/en/ph/cherry/sw...ured%20Products

Definitely the way to go.

 

[McRide]

https://dkc1.digikey.com/us/en/ph/cherry/sw...ured%20Products
Definitely the way to go.

+1, very well made

 

[Barry 07 FJR1300AE]

https://dkc1.digikey.com/us/en/ph/cherry/sw...ured%20Products
Definitely the way to go.

Those things are huge though?

 

[08FJR4ME]

You might want to PM RJ (Reno John) Clicky

 

[fljab]

I have been looking at the Cherry sealed switches mentioned here; this may be of interest - the product line on pdf

https://www.cherrycorp.com/english/switches.../switch_cat.pdf