We thinking about a fall tech meet?

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sportsguy

searchgeek - author
Joined
Jun 21, 2009
Messages
1,391
Reaction score
49
Location
Camarillo, CA
Looking at the front tire the other day - might have to rustle up some PR2s since the front is getting ready for replacement.

Still need to finish wiring my driving lights, too - may have a bum centech fuse block, though - must troubleshoot at some point...

Anyway, just starting a thread to get folks thinking out loud...you know... instigating 'n all... *whistles*

 
Last edited by a moderator:
...where ya been Willis? :dntknw: Fall Tech Meet is already done and gone...j/k ;) Auburn has mentioned the October time frame. If'n you need a tire changed before then let me know.

--G

 
I got some electrical farkles I need to get mounted.

*blink, blink*

 
Looking at the front tire the other day - might have to rustle up some PR2s since the front is getting ready for replacement.

Whattya got, like 7k miles maybe? PR2's are good for at least 9k. Ride em until they pop.

 
Yes, I was going to wait until the core group was together at WCR to set the date. I was thinking the 2nd or 9th of October.

WCR is 9/9-12.

BluFJR has the Windy Ridge run set for 9/25.

I wasn't sure if there was going to be a Maupin run this year or not? (Who organized it last year BluFJR, Niehart? Can't remember.)

I want to make sure it doesn't interfere with other rides.

If you need to do something sooner, get a hold of me and let's see if we can get it done. I have Panman's Starcom to install when he can get down this way.

 
I got some electrical farkles I need to get mounted.
*blink, blink*
Ah, Barb and her hibeams... *whistles*

Whattya got, like 7k miles maybe? PR2's are good for at least 9k. Ride em until they pop.
Sadly, I'm still on stock tires - no PR2s here yet...and with just under 5K on the Black Barge, I'm already seeing lots of wear on the tread and even some freakin' cracking in the rain grooves... :(

 
Tech day? Someone said tech day?

I'm needing to learn up on this FJR thingamabob, and a tech day would be good.

Always willing to help out with electronics. I like me some electronic farkles. Maybe I should buy some to install before heading to this.

 
I got some electrical farkles I need to get mounted.
*blink, blink*
Ah, Barb and her hibeams... *whistles*

Whattya got, like 7k miles maybe? PR2's are good for at least 9k. Ride em until they pop.
Sadly, I'm still on stock tires - no PR2s here yet...and with just under 5K on the Black Barge, I'm already seeing lots of wear on the tread and even some freakin' cracking in the rain grooves... :(
Duane,

Check out the "For Sale" section, there is a thread about getting a set of PR2 for $223.00 shipped from RockyMountainatvmc.com.

 
Tech day? Someone said tech day?
I'm needing to learn up on this FJR thingamabob, and a tech day would be good.

Always willing to help out with electronics. I like me some electronic farkles. Maybe I should buy some to install before heading to this.

We do one the Spring and one in the Fall. Details, once we get the date nailed down.

 
I got some electrical farkles I need to get mounted.
*blink, blink*
Ah, Barb and her hibeams... *whistles*

Whattya got, like 7k miles maybe? PR2's are good for at least 9k. Ride em until they pop.
Sadly, I'm still on stock tires - no PR2s here yet...and with just under 5K on the Black Barge, I'm already seeing lots of wear on the tread and even some freakin' cracking in the rain grooves... :(
Duane,

Check out the "For Sale" section, there is a thread about getting a set of PR2 for $223.00 shipped from RockyMountainatvmc.com.
Thanks for the tip Marcus - snagged a set for just under $260 with the current coupn code. Went with the "B" version for the rear, hence the added cost.

 
I got some electrical farkles I need to get mounted.
*blink, blink*
Ah, Barb and her hibeams... *whistles*

Whattya got, like 7k miles maybe? PR2's are good for at least 9k. Ride em until they pop.
Sadly, I'm still on stock tires - no PR2s here yet...and with just under 5K on the Black Barge, I'm already seeing lots of wear on the tread and even some freakin' cracking in the rain grooves... :(
Duane, get rid of those POS stock tires. Get some new ones and come on down to change them out. The only regret you will have is why did you wait so long to change them.

 
I got some electrical farkles I need to get mounted.
*blink, blink*
Ah, Barb and her hibeams... *whistles*

Whattya got, like 7k miles maybe? PR2's are good for at least 9k. Ride em until they pop.
Sadly, I'm still on stock tires - no PR2s here yet...and with just under 5K on the Black Barge, I'm already seeing lots of wear on the tread and even some freakin' cracking in the rain grooves... :(
Duane, get rid of those POS stock tires. Get some new ones and come on down to change them out. The only regret you will have is why did you wait so long to change them.
Done and DONE. New PR2's en route. Geez, you guys are a BAD influence...LOL

 
Tech day? Someone said tech day?
I'm needing to learn up on this FJR thingamabob, and a tech day would be good.

Always willing to help out with electronics. I like me some electronic farkles. Maybe I should buy some to install before heading to this.

We do one the Spring and one in the Fall. Details, once we get the date nailed down.
Thanks. Over on Stromtrooper we just kinda had one whenenever enough guys had stuff to work on. Speaking of...there is one this weekend up in B-ham. I'll be checking/changing fluids and checking/relubing the rear drive while the VStrom guys change out sprockets and flush brake fluid. Should be a fun experience. :blink:

 
Tech day? Someone said tech day?
I'm needing to learn up on this FJR thingamabob, and a tech day would be good.

Always willing to help out with electronics. I like me some electronic farkles. Maybe I should buy some to install before heading to this.

We do one the Spring and one in the Fall. Details, once we get the date nailed down.
Thanks. Over on Stromtrooper we just kinda had one whenenever enough guys had stuff to work on. Speaking of...there is one this weekend up in B-ham. I'll be checking/changing fluids and checking/relubing the rear drive while the VStrom guys change out sprockets and flush brake fluid. Should be a fun experience. :blink:
WTF is a sprocket?! Sounds positively archiac... *shivers*

 
Tech day? Someone said tech day?
I'm needing to learn up on this FJR thingamabob, and a tech day would be good.

Always willing to help out with electronics. I like me some electronic farkles. Maybe I should buy some to install before heading to this.

We do one the Spring and one in the Fall. Details, once we get the date nailed down.
Thanks. Over on Stromtrooper we just kinda had one whenenever enough guys had stuff to work on. Speaking of...there is one this weekend up in B-ham. I'll be checking/changing fluids and checking/relubing the rear drive while the VStrom guys change out sprockets and flush brake fluid. Should be a fun experience. :blink:
WTF is a sprocket?! Sounds positively archiac... *shivers*
It's one of those doohickey's that spins around and...yeah, it's science...

 
Tech day? Someone said tech day?
I'm needing to learn up on this FJR thingamabob, and a tech day would be good.

Always willing to help out with electronics. I like me some electronic farkles. Maybe I should buy some to install before heading to this.

We do one the Spring and one in the Fall. Details, once we get the date nailed down.
Thanks. Over on Stromtrooper we just kinda had one whenenever enough guys had stuff to work on. Speaking of...there is one this weekend up in B-ham. I'll be checking/changing fluids and checking/relubing the rear drive while the VStrom guys change out sprockets and flush brake fluid. Should be a fun experience. :blink:
WTF is a sprocket?! Sounds positively archiac... *shivers*
It's one of those doohickey's that spins around and...yeah, it's science...

Ya need a bigger crayon to draw a bigger picture for him to understand... ;) :lol:

 
JoenBigCrayon.jpg


nevermind, I figured it out!

SPROCKET!!!

humans.jpg


...though why anyone wants to lube him up is beyond me... weirdos...

 

Latest posts

Top