What's the best brake light modulator?

redneckj · Jul 19, 2014

I installed the Whelen TIR3 light yesterday. Very impressive light. It is wired up solid now, brakes applied the light is on. I want to install a modulator to flash the TIR3 light 3-4 times then go solid. What modulator is your favorite part and why?

erixun · Jul 19, 2014

I don't have a modulator for my tail light, but my auxiliary brake lights I installed by my license plate modulate for a few seconds then go solid. I have the 'U32' Hyperlites (just running and brake- no turns) and so far have loved them. Seems that people do not ride my butt as much and when stopping they seem to stay back further as well.

With additional license plate bracket they could be added to your existing set up.

redneckj · Jul 19, 2014

Thanks for the reply. I don't need any extra light at this time. This light is used on police cars and motorcycles. I would like to flash what I have then go solid.

RichDoyle · Jul 19, 2014

I use the SupaBrake - 2. It's a particularly clean install, as it plugs in line to the cable that feeds your tail and brake lights. No tapping of wires. There's a "standard" module and one that will allow you to decide what the pattern is. Here's the base site address:

https://www.vizi-tec.com/brake-light-modulator/

Geezer · Jul 19, 2014

Modulators work best with LED brake lights. You can't flash an incandescent bulb nearly as fast. That's one reason why most of us with brake modulators use them with auxilliary, LED, lights. The only one I know of that works with the stock lights is Signal Dynamics BACK OFF modulator.

redneckj · Jul 19, 2014

I will only use the modulator with the TIR3 LED light.

RichDoyle · Jul 19, 2014

The SupaBrake seemed to work OK with the stock bulbs and Givi light kit (which is LED). But I swapped out my stop/tail light bulbs for LEDs and the flicker effect is more pronounced. If you want to only power the TIR3 then the Supabrake wouldn't be a vey convenient choice.

If you do swap in LEDs for the stock bulbs you have to pick the right ones. Many so-called replacement aren't as bright as the stock incandescents. The ones I got are. There are a total of 52 LED nodes (26 each) in the two replacement lamps together.

no1passesme · Jul 19, 2014

I have the Whelen on my bike (and on my 09 that I sold) and I used the MCL flasher . . . totally programmable to do just about any pattern you want and simple to install. Here in CA, I have it set to 4 flashes, then solid. I see someone coming up behind me when I'm stopped, a simple off/on of the brakes usually catches their attention.

steveoreno · Jul 19, 2014

I had a Back Off brand on my old Connie and it worked quite well.

El Cajone · Jul 19, 2014

I use the Signal Dynamics Back Off modulator. Have it wired to my auxiliary LED lights. Benn running for about 6 years now with no problems.

TheZsdad · Jul 19, 2014

This is the one I have been using for a couple years with the whelen LIN3. Zero problems with it.

https://www.summitracing.com/parts/upd-90655?seid=srese1&gclid=CIzZmMew0r8CFUiGfgodbxYAeQ

Geezer · Jul 19, 2014

redneckj said:
I will only use the modulator with the TIR3 LED light.

Sorry, I misunderstood. In that case, the one I have is excellent and inexpensive. It has many flash patterns available, but i use the one with three quick flashes followed by steady on. This Universal brake light flasher is the one I have

Bounce · Jul 19, 2014

Instead of modulating the brake lights (of which there are scant few) I chose to add more lights to the back as Hyper-Lights. Add to instead of subtract from existing lights back where you want people to see you. Highly visible. Won't mess with the ABS sensors, etc.

bluesdog · Jul 19, 2014

Reading through the replies, I suspect some aren't noticing the OP wants to modulate the auxiliary brake light he installed:

I want to install a modulator to flash the TIR3 light 3-4 times then go solid

Not modulate the OEM stock brake light

Last Chance · Jul 19, 2014

You are correct, I misread it. However, for those that want to "modulate" the OEM brake lights, I installed Kisan modulating brake lights. Direct replacement for the bulbs only! I chose halogen over the LEDs and I've read of one person having problems with the LED version. (Full disclosure, only one person commented on another forum.) I've really like the ease of install (just replace the bulbs) and they are bright.. modulate rapidly to full on in 4 seconds.. Just what I wanted.

BigOgre · Jul 20, 2014

Geezer said:
redneckj said:

I will only use the modulator with the TIR3 LED light.

Click to expand...

Sorry, I misunderstood. In that case, the one I have is excellent and inexpensive. It has many flash patterns available, but i use the one with three quick flashes followed by steady on. This Universal brake light flasher is the one I have

I twice ordered these same parts and each time the setup found its way onto a different bike. I've had many comments on it and they've worked flawlessly for several years now. Really should just order another set and get the FJR done.

art miller · Jul 21, 2014

I put in a pair of Kisan modulating bulbs in my FJR and they do just what I want them to do. They are as bright or more than the OEM brake lights. No farting around with added wiring. Remove the OEM bulbs and replace with Kisan.

proverbio · Jul 21, 2014

I have the Kisan's for my headlights and the Viz-Tecs for the rear. I just ordered a set of LEDs for my Givi case from Admore. My bike should light up like a christmas tree at night.

https://admorelighting.com/store/

https://www.vizi-tec.com/supabrake-2/

John d · Jul 21, 2014

I've been using one like this for a few years now. https://m.ebay.ca/itm/400323975684?nav=SEARCH

It works great.

What's the best brake light modulator?

Help Support Yamaha FJR Motorcycle Forum:

Well-known member

My helmet is on too tight....

Well-known member

Well-known member

Parsimonious Curmudgeon

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Mr. Bill goes for a ride&#33;

Parsimonious Curmudgeon

Chicks Dig Scars

Well-known member

Well-known member

Well-known member

Well-known member

Member

Well-known member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!

Mr. Bill goes for a ride!