You grew up on a farm huh. Work with whach'ya got.
Look at the caliper and piston, they are chowed in IMO. The piston has a lot of meat missing, it's not flat any more due to partial piston radius contact to the rotor, the heating of that piston to discoloration can't be good. The caliper is chowed too, meat missing, not flat contact to pad, etc. Don't take a chance with critical parts that may save your life. Maybe get a used brake caliper with piston from ebay or something, and get new pads etc. Replace the rotor too, again maybe go used. I'd even replace the brake line just to be sure no contamination got back in there.
Just sayin'
Last edited by a moderator:
