DeweyIsgod
Well-known member
I'm at the farkling point in my life where a fuze block has become necessary. I went with the fuzeblocks.com Fz1 model because I like the built-in relay and the flexibility to have both constant and switched power flexibility for future devices in one box. The best slogan ever was just gravy to the purchase: "Our stuff blows". My question is where on the bike (Gen II) is the best location to mount it and what is the best source for the relay feed for that mounting location?
I have:
1) Zumo 660 currently wired directly to the battery (will be switched source after re-wire)
I'm also installing:
2) Coocase topcase with lights and electric lock (constant power with it's own relay to the brake lights)
3) Escort 9500 (want switched power)
Thinking about future
4) volt-meter (likely)
5) tbd farkle
6) tbd farkle
I have:
1) Zumo 660 currently wired directly to the battery (will be switched source after re-wire)
I'm also installing:
2) Coocase topcase with lights and electric lock (constant power with it's own relay to the brake lights)
3) Escort 9500 (want switched power)
Thinking about future
4) volt-meter (likely)
5) tbd farkle
6) tbd farkle