RossKean

I have never seen a successful repair of an FJR ABS unit! Don't speak the language, but you can get English subtitles. (Bookmarked for...

Perhaps the problem is inside the unit due to a stucked solenoid valve. Here is the procedure to disassemble the valves for Gen1...

Nice looking '06. Aftermarket exhaust (can't tell which ones), Russell seats and Givi SR357 rack plus topbox. Which aftermarket...

Here are 2 photos of my 2006 FJR1300

Welcome! What do you ride?

If you are getting service work done, especially if they are doing a valve check, you might want to consider replacing the cam chain...

If you get a quote on a long list of services recommended by a tech, run it by us on the forum if you have questions about any of it. A...

Thanx! that's kinda what I'd thought, but the confirmation is appreciated as well as a clearer understanding of the diagnostics. Much...

No. Only if there is an active error code which you can easily read yourself. Read the following from our dear departed Ionbeam...

Good discussion and updates to info. Thanks everyone.

Not according to all the research I have done. Way to much effort for little gain.

2006 is Gen II with linked brakes. Some 2004 and 2005 are ABS models, but do not have linked brakes. On the 2006, if you are not...

Fair enough - agreed that dropping them on a hard surface is detrimental to their health but I would also note that an AGM is far more...

Not storing a lead chemistry battery on concrete used to be important in the days when battery casings were made from more porous (and...

There was a reply to a spammer post that has been removed. That was the new member, not you (and they had been spamming in another...