Rocnsanman

warm the area of the middle bushing (just under where the fork seal was) with a torch, use MAPP gas cylinder for best results. Only...

Is this what you are looking for...

If they are all still in spec, I wouldn't touch them until the next check, unless you are planning a lot of riding in the upcoming...

The Yuasa YOU have to fill is a YT14B-BS .... made in USA. All year FJR use the same size battery as reviews are the OEM GT series...

Hello Lester, Welcome and good to have you aboard. 78 and still riding, very cool! You have me beat by 6 years. You are correct, a lot...

Update on the new to me ‘18: It’s almost ready for LD Riding comfortably:

From the FSM Left Front Right Upper Right Lower Rear.

Yes. Just in the habit of doing the one furthest from the master cylinder first. I have never used a Mity-Vac (or Speed Bleeders) for...

I think you guys pretty much all have it right. The only thing I would add it to make sure that the rear brake has sufficient grease on...

There is a very specific procedure for a proper bleed. And the FJR needs to have it followed to help eliminate any issues. Bleeding...

Wuss. It's only a day ride for me too. But one helluva longer day ride.....

Thanks , done and I look forward to meeting you all.

Yes, the bolt pattern fits. However, they may not be the exact same length and position as the stock mirrors. A common thing to do has...

1.10 kg/mm would be 10.8 N/mm, so within the range for the HyperPro (9.5 - 14 N/mm)

Mostly because rider, pillion and top bag add up to 400 lb plus 40 lb tongue weight of trailer. On rear there seem to be 2 options...