Rocnsanman's latest activity

Final update: The new, NEW battery was installed, the parts* arrived, and the tech came out and installed them this morning. As he was...

If you were only closer.....

Marc Parnes is a quality product, no doubt. I cheaped out a few years ago and bought a Bike Master and I like the build quality and the...

Like the Fart Smeller above me said, we was just having some fun. No animals were harmed or took offense at the content of our posts.......

I grew up with 3 older brothers. My dad kept some boxing gloves just for this type of thing. He would have pushed both of you out the...

Here are my thoughts. The stock FJR mirrors are marginal at best unless all you want to see are your shoulders. I had the OEM FZ1...

I found the caps. Gotta be honest, one of the valve stems seems "bent" or out of round where the cap screws on. Just doesn't look...

Yessir, Be careful on the Gen 2 when removing cover to the air filter as Yamaha is very stingy with the wiring. I figured it must be...

Just throwing this out here. I had a similar issue a few years ago and it turned out to be an issue with the ECU. Apparently when I...

Well, the proof will be in the pudding when you go to reinstall. To need to remove the fender or not?

Lost in translation...

If the gauges sweep and you can hear the fuel pump spin the 50a fuse is good. Wide open throttle and fully charged battery. Are you...

Does it turn over but just not catch? Slow to crank, or not cranking at all? 2018, right? If it is cranking at decent speed and not...

Won't hurt to service your fuel filler neck and vent lines.

I don't think a liter will quite do it. Seems to me it is around 650-700 mL per side. I always do a pre-rinse with fresh fluid if I am...